|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Items Description
100% Brand New
Attachment Type:Bolt On
Material:Metal and Plastic
Fitment:Direct Replacement
Tech Tips
Use painter’s tape rather than duct tape to secure window. It is less likely to damage paint or leave sticky residue.
A plastic pry tool is useful. It will not easily damage delicate trim like a screwdriver or metal pry bar.
The replacement regulator should have a liberal amount of grease on slide area. If there is not much grease present, white lithium grease works well to lubricate the slide area.
Window run channels should be cleaned and lubricated before installation of a new window regulator assembly. Silicone spray works well.
Removal Instructions
STEP 1: Using a Phillips head screw driver or Torx bit set, remove the interior door trim panel retaining screws/Torx bits.
STEP 2: Remove the interior door handle screws/Torx bits, and remove the interior door handle.
STEP 3: Remove the power switch assembly and disconnect the power switch harness.
STEP 4: Using an interior trim removal tool, remove the interior door trim panel.
STEP 5: Temporarily connect the power switch assembly to lower the door glass,exposing the screws attaching the door glass to the window regulator.
STEP 6: Remove the screws attaching the door glass to the window regulator. Once the screws have been removed, manually slide the door glass into the closed position, and hold in place with either painter’s tape, a wedge, or a suction cup saddle assembly.
| Item Specifics | |
|---|---|
| Brand | kintop_coilparts |
| Manufacturer Part Number | KIN150298TOP |
| Manufacturer Warranty | 2 Years |
| Type | Regulator & Motor Assembly |
| OE/OEM Part Number | 748-916 |
| Superseded Part Number | Front Driver Side Replacements |
| Placement on Vehicle | Left Front |
| Packaging Type | Box |
| Package Includes | 1 Power Window Regulator |
| Gear Material | Plastic |
| Fitment(Note) | Verify this part fits your vehicle using the compatibility chart |
| Housing Material | Steel |
| Frame Material | Metal and Plastic |
| Fitment Type | Direct Replacement |
| Motor Included | Yes |
| Operating Mode | Electric |
| Fit for | 2003-2006 Acura MDX |
| Surface Finish | Smooth |
| Fitment(Note) | Verify this part fits your vehicle using the compatibility chart |
| Housing Material | Steel |
| Universal Fitment | No |
| Vintage Car Part | No |
| Modified Item | No |
| Performance Part | No |
| Installation Instructions Included | No |
We can accept Credit card, Debit card, Apple Pay, Google Pay, visa, or master card, and so on. Thank you.
Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).
All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
All of our brand new items come with a 60-Days money-back guarantee.
Any question, please contact us by e-mail on working days.
Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.

Terms & Contact Payment Policy Shipping Policy Return Policy FAQ About Us |
Front Left Driver For Acura MDX 2003-2006 Power Window Regulator w/ Motor
Items Description
100% Brand New
Attachment Type:Bolt On
Material:Metal and Plastic
Fitment:Direct Replacement
Tech Tips
Use painter’s tape rather than duct tape to secure window. It is less likely to damage paint or leave sticky residue.
A plastic pry tool is useful. It will not easily damage delicate trim like a screwdriver or metal pry bar.
The replacement regulator should have a liberal amount of grease on slide area. If there is not much grease present, white lithium grease works well to lubricate the slide area.
Window run channels should be cleaned and lubricated before installation of a new window regulator assembly. Silicone spray works well.
Removal Instructions
STEP 1: Using a Phillips head screw driver or Torx bit set, remove the interior door trim panel retaining screws/Torx bits.
STEP 2: Remove the interior door handle screws/Torx bits, and remove the interior door handle.
STEP 3: Remove the power switch assembly and disconnect the power switch harness.
STEP 4: Using an interior trim removal tool, remove the interior door trim panel.
STEP 5: Temporarily connect the power switch assembly to lower the door glass,exposing the screws attaching the door glass to the window regulator.
STEP 6: Remove the screws attaching the door glass to the window regulator. Once the screws have been removed, manually slide the door glass into the closed position, and hold in place with either painter’s tape, a wedge, or a suction cup saddle assembly.
We can accept Credit card, Debit card, Apple Pay, Google Pay, visa, or master card, and so on. Thank you. All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days. All of our brand new items come with a 60-Days money-back guarantee. Any question, please contact us by e-mail on working days. Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time. All rights reserved. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||