|
Front Pair Struts Spring Assembly For 07-10 Jeep Patriot Dodge Caliber 2.0L 2.4L?
Feature
-
Size:71.40(L)*42.00(W)*24.00(H)
-
Single Weight(KG): 19.55
-
Extended Length (in.): 20.080
-
Compressed Length (in.): 13.540
Application For
- 2007-2017 Jeep Patriot
- 2007-2017 Jeep Compass 4WD
- 2007-2012 Dodge Caliber
Package Included
1 Pair of Complete Struts Assembly W/ Coil Spring (Left & Right)
What are the benefits replacing the shock absorber?
- Buffer conveys shock to drivers and passengers in order to improve ride comfort and reduce fatigue.
- Extend body life, prevent spring damage and improve braking effect.
- Suppressing the rapid vibration of the wheels while driving, preventing the tires from leaving the road surface and improving the driving stability.
- Improving driving stability and adjustability, effectively conveying engine deflagration pressure to the ground, so as to save fuel costs.
Why should I buy a complete strut assembly instead of replacing the bare strut only?
The complete strut assembly includes a new spring, strut mount, dust bellows, and bump stop. It is about 50% faster and much safer to install a complete strut assembly compared to a bare strut.
Generally, a new strut mount, dust bellows, and bumper are needed with the bare strut replacement. So, the complete strut assembly saves time, is cheaper than the bare strut plus purchasing the replacement strut mount kit and is much safer to install.
Symptoms of a Worn Strut
If your vehicle has racked up a lot of miles, or the miles you've gone have been rough, you might notice:
- Increased Bumpiness
- Cupped Tire Wear
- Increased Body Roll
- Dives When Braking
- Acceleration Squat
- Clunking Noise
These can all be signs that your struts or springs are beginning to wear out and needing replacement. When deciding between a bare strut replacement or a complete strut assembly (loaded strut, quick strut) there are a few issues you should consider.
How to check whether the shock absorber works well？
- Under normal circumstances, oil leakage in the shock absorber means that there is a problem with your shock absorber. You should repair it at this time to avoid abnormal operation of the shock absorber.
- Press the bumper firmly, and then release it. If the car jumps 2 or 3 times, it means that the shock absorber is working well.
- When the car is driving slowly and braking urgently, if the car vibrates violently, it means there is a problem with the shock absorber.
- The car stops after driving 10km on the road with poor road conditions and touches the outer shell with your hands. If the temperature is not high enough, it means that there is no resistance inside the shock absorber and the shock absorber does not work.
Installion
Step 1.Loosen, but don't remove, the front tire's lug nuts.
Step 2.Jack up one side of the vehicle and place a jack stand underneath to secure it.
Step 3.Remove the lug nuts and wheel.
Step 4.Locate the stud and look for any brake lines that may be fastened to it. If there are, carefully remove the brake line and its fasteners without damaging them.
Step 5.Unscrew the bolts that are on the bottom of the strut connecting it to the wheel/steering components. You may need to use spray-on penetrating oil, a socket and breaker bar, and box wrench to remove stubborn bolts if they're rusted.Depending on your vehicle, there may also be a sway, anti-roll or stabilizer bar that needs to be removed.
Step 6.Open the hood and locate the top of the stud where it's attached to the vehicle. On many vehicles, it will appear as three bolts in a circular pattern around a center bolt. Do not remove the center bolt as the strut is compressed under high pressure and loosening the center bolt will allow it to fly loose, damaging anything in its path. Remove the three bolts surrounding the center bolt.At this point, it may be helpful to have a partner holding the strut to keep it from falling and possibly damaging other components like flexible brake lines and boots.
Step 7.Remove old strut assembly from the wheel well, avoiding contact with the CV axle or drive axle so you don't damage them.
Step 8.Install the quick strut following the manufacturer's directions.
Step 9.Repeat the procedure for changing struts on the vehicle's other side.
Step 10.Take the vehicle for a low-speed test drive. After confirming your repair, head down to your trusted repair facility for an alignment.
Why choose us?
- High Quality Product and Materials
- Built to strict quality control standards
- Direct replacement
?
Note
- Please check complete Year, Make, Model, Trim, and Engine Size of your vehicle in the Compatibility Chart before Purchase.
- If you have any question,please contact us,THANK YOU.
| Item Specifics | |
|---|---|
| Brand | auspartshouse |
| Manufacturer Part Number | 9873728 |
| Placement on Vehicle | Front,Left,Right |
| Part Type | Strut & Coil Spring Assembly |
| Fitment Type | Direct Replacement |
| Kit or Single Part | Kit |
| Manufacturer Warranty | 1 Year |
| Size | 71.40(L)*42.00(W)*24.00(H) |
| Quantity | 2 Pcs |
| Gas Charged Shock | Yes |
| Surface Finish | Powder Coat |
| Color | Black |
| Single Weight(KG) | 19.55 |
| Extended Length (in.) | 20.080" |
| Compressed Length (in.) | 13.540" |
| Adjustable | No |
| Greasable or Sealed | Sealed |
| Interchange Part Number | 172368,172367,Driver Side Passenger side |
| Custom Bundle | Yes |
| Modified Item | No |
1. More than 90% orders processed within 24 hours of payment verification.
2. We only ship to the address in order provided to us. Your order address will be the shipping address.
3. The images shown is the the actual item you will get and the size are for your reference.
4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.
We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Any question or problem, please feel free to contact us via ebay message.
Just Get It NOW
Shop Category Hot Item
New List Item
|
Front Pair Struts Spring Assembly For 07-10 Jeep Patriot Dodge Caliber 4WD
Front Pair Struts Spring Assembly For 07-10 Jeep Patriot Dodge Caliber 2.0L 2.4L?
Feature
Package Included 1 Pair of Complete Struts Assembly W/ Coil Spring (Left & Right)
What are the benefits replacing the shock absorber?
Why should I buy a complete strut assembly instead of replacing the bare strut only? The complete strut assembly includes a new spring, strut mount, dust bellows, and bump stop. It is about 50% faster and much safer to install a complete strut assembly compared to a bare strut. Generally, a new strut mount, dust bellows, and bumper are needed with the bare strut replacement. So, the complete strut assembly saves time, is cheaper than the bare strut plus purchasing the replacement strut mount kit and is much safer to install.
Symptoms of a Worn Strut
These can all be signs that your struts or springs are beginning to wear out and needing replacement. When deciding between a bare strut replacement or a complete strut assembly (loaded strut, quick strut) there are a few issues you should consider.
How to check whether the shock absorber works well？
Installion Step 1.Loosen, but don't remove, the front tire's lug nuts. Step 2.Jack up one side of the vehicle and place a jack stand underneath to secure it. Step 3.Remove the lug nuts and wheel. Step 4.Locate the stud and look for any brake lines that may be fastened to it. If there are, carefully remove the brake line and its fasteners without damaging them. Step 5.Unscrew the bolts that are on the bottom of the strut connecting it to the wheel/steering components. You may need to use spray-on penetrating oil, a socket and breaker bar, and box wrench to remove stubborn bolts if they're rusted.Depending on your vehicle, there may also be a sway, anti-roll or stabilizer bar that needs to be removed. Step 6.Open the hood and locate the top of the stud where it's attached to the vehicle. On many vehicles, it will appear as three bolts in a circular pattern around a center bolt. Do not remove the center bolt as the strut is compressed under high pressure and loosening the center bolt will allow it to fly loose, damaging anything in its path. Remove the three bolts surrounding the center bolt.At this point, it may be helpful to have a partner holding the strut to keep it from falling and possibly damaging other components like flexible brake lines and boots. Step 7.Remove old strut assembly from the wheel well, avoiding contact with the CV axle or drive axle so you don't damage them. Step 8.Install the quick strut following the manufacturer's directions. Step 9.Repeat the procedure for changing struts on the vehicle's other side. Step 10.Take the vehicle for a low-speed test drive. After confirming your repair, head down to your trusted repair facility for an alignment.
Why choose us?
? Note
We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
Payment Options: Any payment which can be accepted by ebay.
If you want to change the shipping address, please contact us by eBay messages within 12 hours.
Payment must be received within 10 days as auction ended or order might be delayed.
1. More than 90% orders processed within 24 hours of payment verification. 2. We only ship to the address in order provided to us. Your order address will be the shipping address. 3. The images shown is the the actual item you will get and the size are for your reference. 4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility. We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Any question or problem, please feel free to contact us via ebay message. All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
