|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vehicle Fitment Information:
1996-2004 Acura RL
Notes:
(1)Check and view the above product description (item details) for all part numbers, part brands, places in the vehicle and compatibility. Make sure this is the right accessory for your vehicle.
(2)100% BRAND NEW and tested to meet or exceed OEM specifications.
(3)High corrosion resistance and long service life.
(4)Bare shocks & struts set only, springs and mounts are not included.
(5)Professional Installation is Highly Recommended.
Shock absorber strut
Function:
It can alleviate the impact of road surface, quickly absorb the vibration generated by turbulence, so that the vehicle can return to normal driving state, and improve the smoothness and comfort of the car.
The following problems occur in the vehicle and the strut needs to be replaced:
(1)The car makes abnormal noises (tapping, rattling)
(2)Oil leakage.
(3)Frequent and irregular tire wear.
(4)Poor stability will make you feel very uncomfortable.
(5)The brake takes more time/distance to stop.
(6)The car is difficult to control.
Typical removal and replacement steps of the struts and springs after the struts are independent with coil springs mounted on the struts:
1. Remove the rear seat and package trim tray, remove the wheel cover and loosen the nut.
2. Use a jack to lift the vehicle and place the chassis in a safe position.
3. Place a floor jack lifting pad and raise the floor jack to support the weight of the suspension system.
4. Remove the rear tire, the small spring nut of the lower arm, the brake hose on the struts and the anti-lock braking system wire.
5. Remove the Sway bar from the struts and loosen the bolt from the struts to the spindle.
6. Remove the three supporting nuts under the packaging decoration tray, lower the jack, remove the steering knuckle bolts from the struts to the bottom of the struts and the struts.
7. Install the spring compression tool according to the vehicle and manufacturer's recommended instructions and tighten the tool until all spring tension is removed, then remove the prop rod nut.
8. Remove the struts rod nut, upper bracket and upper insulator.
9. Remove the support from the lower end of the spring and check the lower insulator and spring seat on the strut. if the spring seat is warped or damaged, replace the strut.
10. Check the upper installation, insulators and spring bumpers. If there is damage, wear and deformation, they need to be replaced in time.
11. Assemble spring bumpers, upper mounting parts and insulators when the vehicle is driving on irregular roads. Then use the compression tool to decompress the coil spring, install the support and related parts to the spring and tighten all fasteners to the torque specified by the manufacturer.
12. "Road test" your vehicle immediately to ensure proper installation.
When driving slowly over speed bumps, rough roads, or potholes, listen and feel for common signs of installation errors.
| Item Specifics | |
|---|---|
| Brand | OnCarmotor |
| Items Included | Mounting Hardware |
| Type | Strut Assembly |
| Features | 100% Accuracy of Fit |
| Shock Absorber Type | Gas |
| Shock Absorber System | Double Pipe |
| Manufacturer Warranty | 1 Year |
| Material | Steel |
| Performance Part | No |
| Universal Fitment | No |
| Mounting Style | Screw-On |
| Superseded Part Number | Shock Absorber and Strut Assembly |
| Quantity | 4pcs |
| Manufacturer Part Number | 11477255 |
| Adjustable | No |
| Fitment Type | Direct Replacement |
| Placement on Vehicle | Front Rear Left Right |
| OE/OEM Part Number | 72156 ,72157 ,71381 |
| Interchange Part Number | 341434 ,341435 ,341437 |
30-day free return provided.
Shop Category Hot Item
Picture
New List Item
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Front Rear Left Right Struts Shocks For 1996-2002 2003 2004 Acura RL 341434
Vehicle Fitment Information: 1996-2004 Acura RL
Notes: (1)Check and view the above product description (item details) for all part numbers, part brands, places in the vehicle and compatibility. Make sure this is the right accessory for your vehicle. (2)100% BRAND NEW and tested to meet or exceed OEM specifications. (3)High corrosion resistance and long service life. (4)Bare shocks & struts set only, springs and mounts are not included. (5)Professional Installation is Highly Recommended.
Shock absorber strut Function: It can alleviate the impact of road surface, quickly absorb the vibration generated by turbulence, so that the vehicle can return to normal driving state, and improve the smoothness and comfort of the car. The following problems occur in the vehicle and the strut needs to be replaced: (1)The car makes abnormal noises (tapping, rattling) (2)Oil leakage. (3)Frequent and irregular tire wear. (4)Poor stability will make you feel very uncomfortable. (5)The brake takes more time/distance to stop. (6)The car is difficult to control.
Typical removal and replacement steps of the struts and springs after the struts are independent with coil springs mounted on the struts: 1. Remove the rear seat and package trim tray, remove the wheel cover and loosen the nut. 2. Use a jack to lift the vehicle and place the chassis in a safe position. 3. Place a floor jack lifting pad and raise the floor jack to support the weight of the suspension system. 4. Remove the rear tire, the small spring nut of the lower arm, the brake hose on the struts and the anti-lock braking system wire. 5. Remove the Sway bar from the struts and loosen the bolt from the struts to the spindle. 6. Remove the three supporting nuts under the packaging decoration tray, lower the jack, remove the steering knuckle bolts from the struts to the bottom of the struts and the struts. 7. Install the spring compression tool according to the vehicle and manufacturer's recommended instructions and tighten the tool until all spring tension is removed, then remove the prop rod nut. 8. Remove the struts rod nut, upper bracket and upper insulator. 9. Remove the support from the lower end of the spring and check the lower insulator and spring seat on the strut. if the spring seat is warped or damaged, replace the strut. 10. Check the upper installation, insulators and spring bumpers. If there is damage, wear and deformation, they need to be replaced in time. 11. Assemble spring bumpers, upper mounting parts and insulators when the vehicle is driving on irregular roads. Then use the compression tool to decompress the coil spring, install the support and related parts to the spring and tighten all fasteners to the torque specified by the manufacturer. 12. "Road test" your vehicle immediately to ensure proper installation. When driving slowly over speed bumps, rough roads, or potholes, listen and feel for common signs of installation errors.
About Us:
We are a professional auto-parts shop, we are committed to making the best auto-parts products and providing you with better services and cost-effective prices.
If you have any questions, please contact us. Please trust us, we will reply to your questions in a short time, and provide solutions as soon as possible.
Payment:
1.Any payments accepted by ebay also can be accepted.
2.If you want to change the shipping address, please contact us by eBay messages (We can change the address according to the new address you provide after we check it.)
Shipping:
2-8 working days in transit.
1.Product will be shipped within 1-2 business days after full payment is received and verified.
2.All orders will be shipped from our US warehouses.
3.Packages will shipped out by the carriers below: USPS、FedEx、UPS、DHL and other carriers.
4.If you need an accurate logistics tracking number, contact us and we will provide it as soon as possible.
Returns:
30-day free return provided. 1.Return shipping is to be paid by the Buyer.
2.Any returning or exchanging item must be in new condition and cannot be tempered.
3.Please contact us via eBay email before returning the goods,We will provide a solution as soon as possible.
Contact Us:
Satisfaction of customers is just our untiring pursuit!
Any quesiton or problem, do contact us please. We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
