We stand behind every product we sell.
All of our brand new items come with a 30-Day money-back or exchange guarantee.
Front Rear Shocks Struts Assembly Fits 2007-2016 Toyota Tundra Full Set Of 4pcs
$77
DESCRIPTION
|
|
|
|
Front Rear Shocks Struts Assembly Fits 2007-2016 Toyota Tundra Full Set Of 4pcs
Item specifics
Description:
Classic autoparts only sell 100% brand new products in good condition. We do not sell any refurbished or refurbished parts.
Our product includes all the components required for strut replacement in a single, fully assembled unit and is ready to install. The Complete Assembly unit is easier and faster to install than traditional struts. It is safer because we don’t need to compress coil springs.
Item-condition
- 100% brand new in factory original condition. Never been used or installed.
- Enhances overall handling, safety and performance of your vehicle.
- OE Quality TS16949 certified.
- Top Quality JAPANESE MADE OIL PISTON SEALS!
- Pressurized N2 gas to reduce foaming and aerating. Also to ensure product better performance.
- Effectively to reduce the effect of traveling over rough ground.
- Seamless cylinder & sleeves to reduce the possibility of splitting to ensure close contact between the piston & cylinder no leaks to obtain stable damping force.
- precision robotic welding in most of the applications.
- Powder-coated finish for corrosion resistance and long time service.
- Hard chromed piston rod micro-cracks chromed surface processed & ultra-precision vertical polishing to ensure smooth contact between the piston rod & seal.
- Buckle holes are consistent with the original car in situ for easy & quick installation without any changes.
- Newer valving technology operates in stages based on the velocity of the car.
- Stock in USA, 1 year warranty.
Compatible with the following vehicles:
2007-2021 Toyota Tundra
Item Pcakage Included:
4Pcs Shocks Struts Assembly（Front and Rear Pair）
HOW TO INSTALL :
Step 1: Before you lift the vehicle, loosen lug nuts one full turn.
Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.
Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help
keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt
Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.
Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need
replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc).
Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)!
Opening brake lines will require bleeding of the brake system.
Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in
expensive and time consuming repairs.
Step 7: Remove sway bar attached to the strut assembly or control arm.
Step 8: Remove the tie rod (only if it attached to the body of the strut, if not leave it attached to the steering knuckle).
Step 9: Remove the strut to knuckle bolts at the bottom of the strut. On some vehicles, the brake caliper and rotor
may need to be removed to gain access.
Step 10: Remove the upper mounting plate bolts located in the engine or trunk compartment. Do not remove the
center retaining nut! It is not safe to unload the spring from the assembly in this position.
Step 11: Carefully remove the old strut assembly from the vehicle. Be very cautious not to let the strut "drop" down
on your brake line, rotor or drum.
Step 12: Install the new Complete Strut Assembly in the reverse order as above (steps 11-6). Using an anti-seize
compound on all fasteners is suggested.
Step 13: Carefully double check your work and make sure everything is tightened to manufacturers torque specifications.
Step 14: Replace the tire the rotor and tighten to manufacturers torque specifications.
Step 15: Slowly lower the vehicle down after removing the jack stands. Pay very close attention to any odd sounds
when the vehicle is lowered onto the new Complete Strut Assemblies.
Step 16: It is very important that you immediately "road test" your vehicle right away to ensure that installation was done properly.
Listen and feel for common signs of incorrect installation while driving slowly over speed
bumps, rough road or potholes.
Shocks and Struts Features & Benefits:
✔ Made to OE quality standards and performance.
✔ High corrosion resistance and long service life. Steel rod is mirco-polished with double chrome plate.
✔ Newer Valving technology operates in stages based on the velocity of the car.
✔ Use Teflon bonded piston seal to keep friction down and temperature cooler so that valving stays firmer.
✔ All-around welding on the spring seat.
✔ Piston seal is provided by an OE Supplier.
The Causes Behind Leaking Shocks Struts:
If your shocks are leaking fluid, they could be less efficient at both dampening jolts and heat dissipation.
Pro Tip: Shocks can fail internally but never leak externally. Failed shocks don’t dampen spring oscillations.
This means that when you go over a bump, the end of the vehicle with failed shocks will continue to bounce rather than just go over the bump like it should.
Generally, if there’s a leak, you’ll notice decreased performance in your shocks, leading to a bumpier ride, unusual noises, irregular tire wear, and reduced handling and braking ability. Alternatively, you might be mistaking natural shock operations for a leak.
The following are some causes that can lead to your shocks leaking, whether as a result of damage or as part of their shock-absorbing process:
✔ Oil Mist Residue
Oil mist residue is a perfectly natural part of your shocks operating as designed. It mostly appears on very dry shocks because you won’t notice it otherwise. Oil mist occurs when the piston rod spreads a very small amount of oil from the cylinder onto the seal. The rod appears damp, but it won’t feel wet if you touch it.
However, if you see oil mist that is coming from inside the shock, you can’t add oil. In this case, you must replace the shock and it’s best to replace them in pairs (both front or both rear).
✔ Damaged Piston Shaft
A damaged shaft can lead to leaking shock fluid. When the shaft has scratches or other damage, it can tear the seal, which leads to oil loss and reduced performance. These scratches and dents can come from flying pieces of debris scratching the surface or from the shaft being improperly installed.
✔ Bad Shock Struts Seals
Shock seals block the inside of your shocks from the dirt and grime of the outside world. Over time, seals may become brittle and get torn easily. Rocks, gravel, and other debris can also damage your shock seals, leading to an eventual leak.
✔ Worn Chrome Coating
Your car shocks might be leaking because the coating on one of the piston rods is worn down. If the damper isn’t aligned properly, the coating is rubbed away. The shock seal and piston rod guide then sustain more damage as the misaligned damper continues to operate. Once these parts wear down, the shocks will leak
✔ Wear and Tear
General wear and tear will eventually lead to front and rear leaking shocks. Your shocks go through a lot of abuse and will eventually leak and need replacing.
Warranty:
This item is backed by a 1 Year Warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge for the original purchaser. Thank you for your support!
| Item Specifics | |
|---|---|
| Brand | classic-autoparts |
| Manufacturer Part Number | CA808SS576AP |
| Type | Strut |
| Fitment Type | Direct Replacement |
| Placement on Vehicle | Left Right Front Rear |
| Manufacturer Warranty | 1 Year |
| Features | Sealed |
| Modified Item | No |
| Adjustable | No |
| Gas Charged Shock | Yes |
| Interchange Part Number | 341480,349054 |
| Other Part Number | 71119,37298 |
| Kit or Single Part | Kit |
| Kit Parts Included | Set of two front struts and two rear struts |
| Surface Finish | Powder Coat |
| OE Spec or Performance/Custom | OE Spec |
| Color | Gloss Black |
| Return Policy | Free return or replacement within 30 days |
| Shock Absorber System | Double Pipe |
| Shock Absorber Type | Gas |
| Vintage Car Part | No |
| Material | Steel |
| Mounting Style | Screw-On |
| Performance Part | No |
| Quantity | 4Pcs |
| Superseded Part Number | Shock and Strut |
| Universal Fitment | No |
| Included Hardware | Mounting Hardware |
| Item Length | 23.520"(F),24.380"(R) |
| Compressed Length | 17.760"(F),15.000"(R) |
| Travel Length | 5.760"(F),9.380"(R) |
| Gross Weight (LB) | 30.424 |
| Package Dimension (in.) | 26.57*8.66*4.72 (F), 24.41*6.3*3.54 (R) |
| Part Name | Shock Absorber and Strut Assembly |
Payment
1. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
2.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
Shipping
1.All the orders are shipped from USA warehouse.
2.Orders processed within 24 hours of payment verification.
3. The images shown are not the actual item and are for your reference only.
4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns
Contact Us
If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.
Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us feedback, so that we can satisfactorily address your concerns.
Store Category Hot Item
Fast and Free
Best seller
|
Front Rear Shocks Struts Assembly Fits 2007-2016 Toyota Tundra Full Set Of 4pcs
Item specifics
Description:
Classic autoparts only sell 100% brand new products in good condition. We do not sell any refurbished or refurbished parts. Our product includes all the components required for strut replacement in a single, fully assembled unit and is ready to install. The Complete Assembly unit is easier and faster to install than traditional struts. It is safer because we don’t need to compress coil springs.
Item-condition
Compatible with the following vehicles: 2007-2021 Toyota Tundra Item Pcakage Included:
4Pcs Shocks Struts Assembly（Front and Rear Pair）
HOW TO INSTALL :
Shocks and Struts Features & Benefits: ✔ Made to OE quality standards and performance. ✔ High corrosion resistance and long service life. Steel rod is mirco-polished with double chrome plate. ✔ Newer Valving technology operates in stages based on the velocity of the car. ✔ Use Teflon bonded piston seal to keep friction down and temperature cooler so that valving stays firmer. ✔ All-around welding on the spring seat. ✔ Piston seal is provided by an OE Supplier.
The Causes Behind Leaking Shocks Struts: If your shocks are leaking fluid, they could be less efficient at both dampening jolts and heat dissipation. Pro Tip: Shocks can fail internally but never leak externally. Failed shocks don’t dampen spring oscillations. The following are some causes that can lead to your shocks leaking, whether as a result of damage or as part of their shock-absorbing process: ✔ Oil Mist Residue Oil mist residue is a perfectly natural part of your shocks operating as designed. It mostly appears on very dry shocks because you won’t notice it otherwise. Oil mist occurs when the piston rod spreads a very small amount of oil from the cylinder onto the seal. The rod appears damp, but it won’t feel wet if you touch it.
Warranty: This item is backed by a 1 Year Warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge for the original purchaser. Thank you for your support!
1. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
2.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
1.All the orders are shipped from USA warehouse.
2.Orders processed within 24 hours of payment verification.
3. The images shown are not the actual item and are for your reference only.
4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
We stand behind every product we sell. All of our brand new items come with a 30-Day money-back or exchange guarantee. If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue. We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us feedback, so that we can satisfactorily address your concerns. All rights reserved. |
