GE Security/IFS VR7430-2DRDT-R3 4 Channel Digital Video Receiver / 2 Channel Data Transceiver SM Laser 1 Fiber Rack Mount
The VR7430-2DRDT-R3 from GE Security is a 4 Channel Digital Video Receiver / 2 Channel Data Transceiver, SM Laser, 1 Fiber, Rack Mount. The video transmitter/data transceiver and video receiver/data transceiver series utilize state-of-the-art 8-bit igital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for Medium-Haul Video Transmission. These environmentally hardened units provide transmission of four independent video channels and two bi-directional data channel over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. Completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera system, data channels can be set independently for RS-232, RS-422 and 2 or 4-wire RS-485 with tri-state support. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly ascertaining equipment operating status, and these units are available in either stand-alone or rack mount configurations.
Features
8-Bit Digitally Encoded Video Transmission Transmits 4 Real-Time Color Video Signals and 2 Bi-Directional Data
Signal on One Single-mode Optical Fiber
Supports RS-232, RS-422, and 2 or 4-wire RS-485 with Tri-State Data Interfaces
LED Status Indicators Provide Rapid Indication of Critical Operating Parameters
Exceeds All Requirements for RS-250C Medium-Haul Transmission: Extremely High Video Performance
Exceptionally Low Video Distortion with Zero Performance Variation vs. Optical Path Loss
Ideally Suited to Networks Requiring Multiple Physical Layers Where Video Degradation May be a Problem
Directly Compatible with All NTSC, PAL, or SECAM CCTV Camera Systems
NTCIP Compatible
Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental
Requirements
Robust Design Ensures Extremely High Reliability In Unconditioned Out-of-Plant Environments
Solid-State Current Limiters on All Power Lines Provide Unconditional Equipment Protection
Specs
Manufacturer Utc Fire & Security
Video Input 1 volt pk-pk (75 ohms)
Input/Output Channels 4
Bandwidth 10 Hz - 6.5 MHz
Signal-to-Noise Ratio (SNR) 60 dB @ Maximum Optical Loss Budget
Wavelength 1310/1550 nm, Multimode or Single Mode
Number of fibers 1
Optical ST, SC or FC (see ordering information)
Optical emitter Laser Diode
Video BNC (Gold Plated Center-Pin)
Operating Temp -40° C to +74° C
Storage Temp -40° C to +85° C
Current Protection Automatic Resettable Solid-State Current Limiters
Relative Humidity 0% to 95% (non-condensing)
