These GSG crash pad sets directly and reliably protect the engine / engine cover / alternator / clutch cover areas of your bike - in other words: the heart of your motorcycle.
In the event of a tip over or fall, the plastic pads prevent the critical areas from dragging, breaking or otherwise being affected - and have been doing so for over 30 years.

You receive:
GSG engine protection alternator clutch cover crash pad set for: Triumph Street Triple 675 / 675 R (2009 – 2012)
Color of the pads: black
Changes to the bike: minimal drilling of the swingarm axle on the left side, from Ø 7.7 to Ø 8mm

Features

• The GSG pads are out specially selected high-performance plastic Manufactured and precisely turned by CNC. Pads/pad runners of the Streetline version and engine cover attachments/protectors are CNC milled from a high-performance solid plastic material.
• The large contact surface of ~60mm Optimally absorbs the forces that occur in the event of a fall/overturn. The contact surfaces for Streetline and engine cover protection Struzpads/pad runners are even larger due to the construction!
• Precisely calculated radii on the edges of the pads ensure an optimal gliding effect, which brakes the bike in a calculated manner during the sliding phase of a fall, without generating excessive bending and lever forces on the bike/mount and thus avoiding further damage, but providing enough braking effect to brake the bike efficiently.
• All GSG crash pad sets are so-called DUO Safety crash pads: Additional included Damper caps are attached to the pads using a press connection and absorb an additional 1300 N (130 kg) of impact weight in the event of a fall/overturn. The highlight: the damper caps are replaceable and can be purchased inexpensively from our spare parts!
• Except for a few models, one is used Aluminum flange/adapter (2-part construction) or a CNC milled one Aluminum carrier plate as a holder for the plastic pad. This is the only way to ensure a tight fit of the pad and motor in the long term.
• The mounting adapters and carrier plates are made of a special aluminum alloy
• Calculated predetermined breaking and predetermined bending points at the connection points of the pads on carrier plates or on base supports/adapters ensure additional safety. Before extreme leverage forces are transferred to the frame or motor mount, the pads give way when a certain amount of force is applied - this means that consequential damage can almost be ruled out.
• To ensure the correct fit of the pads, GSG pads are included pressed steel bushing equipped - exactly at the point where there is a direct connection to the frame or engine. This means that the manufacturer's torque values ​​for fastening can be correctly adhered to - a secure fit of the pads and the motor is guaranteed (Plastic is a flexible material, therefore only max. Realize 30 Nm as a tightening torque and you will probably drive with a loose, vibrating engine. In the event of a fall, if the motor bolt is only slightly loosened, enormous leverage forces act on the frame eye and the thread can easily widen or tear out at the appropriate point).!
• More than 30 years of experience in racing and on the road make our GSG pads the most tested and proven products in the field of fall protection! Many professional racing teams swear by GSG - and many motorcyclists around the world are convinced and trust the quality and decades of expertise of GSG.

Scope of delivery:
The plastic pads and all required attachments are included. Assembly instructions are included with every model/pad set.
With all 60 mm round pads you also receive the special damper caps for additional protection.