DESCRIPTION
Description
HT008 23.5-6000MHz Signal Generator MAX2871 Chip Serial Port Control RF Signal Source Sinewave Signal
Description:
Adopting MAX2871, 90 x 160 (0.96 inch) OLED color display screen, CH340G USB to serial port chip. It can achieve the following functions:
(1) 23.5-6000MHz signal output.
(2) Accuracy: 0.001MHz.
(3) -4dB, -1dB, 2dB, 5dB power regulation.
(4) Support frequency scanning function.
(5) Support microcontroller serial port control, the microcontroller sends commands through the serial port interface to adjust frequency output and power control.
(6) CH1 supports power adjustment of -4dB, -1dB, 2dB, and 5dB, while CH2 supports power adjustment from -15dB to -25dB.
(7) Support sending commands via USB serial port to adjust frequency output and power control.
(8) Dual power supply supports computers powered by USB or 5V 1A lithium-ion batteries (battery is not included).
Point Frequency Function Description:
- Use the left and right buttons to move the cursor to select different positions, and use the up and down buttons to modify the values of the corresponding positions. The output will change with the variation of the value. The middle button can exit the frequency mode.
Scanning Instructions:
- Use the left and right buttons to move the cursor to select different positions, and use the up and down buttons to modify the values of the corresponding positions. You can set continuous scanning mode and single scanning mode. After setting the start frequency and stop frequency, you can turn on or off frequency scanning by changing the status. The middle button can exit the sweep mode.
Frequency Scanning Setting Function:
- This function can adjust the step frequency and interval time during frequency scanning. Warning: If the start frequency is less than the stop frequency, scan and signal modes cannot be enabled. The host only supports CH1 frequency.
- Point frequency control: baud rate: 115200
Package Included:
- 1 x Signal Source
- 1 x Type-C USB Data Cable
Note:
- Battery is not included.
Description:
Adopting MAX2871, 90 x 160 (0.96 inch) OLED color display screen, CH340G USB to serial port chip. It can achieve the following functions:
(1) 23.5-6000MHz signal output.
(2) Accuracy: 0.001MHz.
(3) -4dB, -1dB, 2dB, 5dB power regulation.
(4) Support frequency scanning function.
(5) Support microcontroller serial port control, the microcontroller sends commands through the serial port interface to adjust frequency output and power control.
(6) CH1 supports power adjustment of -4dB, -1dB, 2dB, and 5dB, while CH2 supports power adjustment from -15dB to -25dB.
(7) Support sending commands via USB serial port to adjust frequency output and power control.
(8) Dual power supply supports computers powered by USB or 5V 1A lithium-ion batteries (battery is not included).
Point Frequency Function Description:
- Use the left and right buttons to move the cursor to select different positions, and use the up and down buttons to modify the values of the corresponding positions. The output will change with the variation of the value. The middle button can exit the frequency mode.
Scanning Instructions:
- Use the left and right buttons to move the cursor to select different positions, and use the up and down buttons to modify the values of the corresponding positions. You can set continuous scanning mode and single scanning mode. After setting the start frequency and stop frequency, you can turn on or off frequency scanning by changing the status. The middle button can exit the sweep mode.
Frequency Scanning Setting Function:
- This function can adjust the step frequency and interval time during frequency scanning. Warning: If the start frequency is less than the stop frequency, scan and signal modes cannot be enabled. The host only supports CH1 frequency.
- Point frequency control: baud rate: 115200
Package Included:
- 1 x Signal Source
- 1 x Type-C USB Data Cable
Note:
- Battery is not included.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Sep 30, 2024 at 02:58:44 PDT, seller added the following information:
On Aug 19, 2025 at 02:41:46 PDT, seller added the following information:
