2023 Elite LAUNCH X431 V+ PRO 4.0 Bi-directional Scan Tool with OE-LEVEL Full System Diagnostics & More than 35 Reset Services & E~CU Online Coding

1. ADAS Calibration: Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.
2. For 2017 and later FCA Vehicles with Secure Gateway Module (SGW): Register with AutoAuth to enable your LAUNCH X431 PROS V+ tablet to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directionals without using a bypass cable.
3. VAG Guided Functions for Audi, Volkswagen Skoda and Seat,etc : On-Screen Instruction step by step , LAUNCH X431 PROS V+ Automotive obd2 scanner guide you to be an expert in Car Diagnostics even you are a newbie. Thanks to this function , you don’t need to reply on a mechanic’s suggestion all the time.**NO extra costs to use the VAG Guided Functions on LAUNCH X431 PROS V+ from Oct,2022.
4. Open the Hidden Features: Make full use of hidden features or disable car’s annoying functions. 3-Time Flasher Setting, Auto L ock/Unl ock Function, one-touch signal flickers, deactivate some buzzing sounds, needle sweep,rear-view mirror folding,disable daytime running light,disable seat belt alarm beep,remove maximim speed limiter,etc.
5. (PMI) Programmable Module Installation : LAUNCH X431 PROS V+ Support PMI function, Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace E~CU) or initialize a module.No need using the J2534 or buying a subscription
6. Power balance Test : Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing, is one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem.
7. A udi /VW firmware protection cancel features: One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts.(Supported BORA, CANDY, GOLF, POLO, SANTANA, TOURAN, A3, A4, A7, A8, Q5, Q7, etc.).Updated online coding feature has more comprehensive data info and supports automatic login. (Full Models and Full Systems)
8. K ey Programming : Add, Delete & Reprogram K eys, Rewrite smart k eys, Replace smart k ey E~CU, Replace KNOB IGNITION; Reset K ey: Relearn a k ey.
9. Cylinder Balance test/Cylinder leakage test/Cylinder Pressure variations/Relative Compression Test
10. Tons of Actuator Test (Functional Test) :Turn ON/OFF Front and Rear side ACM Solenoid , turning the f uel pump on and off, cycling the a/c ,clutch on and off, Left clutch electromagnetic co il test，Acceleration Device Test，O il Pressure Control Test，DYNAMIC camera aiming，Vehicle level position calibration, Brake Vacuum Pump, Inlet and Outlet Valve tests, Open Brakes tests, Parking Brake Botors, Wheel Speed Sensor Supply, PARKING BRAKE tests （Vary by car, Hundreds of actuation test functions ） …

2023 Newly Added CANFD Connector - Revolutionize Your Troubleshooting Journey with the Launch X431 Pros V+ and CANFD Connector!

  

Hey there, fellow car enthusiasts! We've got some thrilling news for you: the Launch X431 Pros V+ just got an awesome upgrade with the CANFD Connector. Trust us, this little gadget is about to revolutionize the way you tackle vehicle troubles.

Picture it like this – the CANFD Connector is like a super-fast data highway between your car and the diagnostic tool. It's the Flash of connectors, zipping information back and forth with lightning speed!

Here's why it's such a game-changer:

More Cars, More Fun: The CANFD Connector makes your Launch X431 Pros V+ compatible with a wider range of vehicle models. It's like giving your diagnostic tool a key that unlocks the doors to the latest rides on the block. You'll be the hero who can tackle any car trouble that comes your way.

Zoom-Zoom Data Transfer: With the CANFD protocol in action, data transfer becomes faster than a racecar on steroids. You'll be zapping diagnostic information from your car's brain to your diagnostic tool quicker than ever before. No more waiting around – you'll be fixing cars at supersonic speed!

Accuracy on Steroids: The CANFD Connector gives you the power to communicate flawlessly with your car's electronic control units (E.CUs). Think of it as a direct telepathic link, giving you access to a wealth of detailed diagnostic info. You'll pinpoint problems with laser-like precision, making repairs smoother than a hot knife through butter.

Future-Proof Your Diagnostic Adventures: As the automotive world keeps evolving faster than a rocket, the CANFD protocol is becoming the norm in newer vehicles. By getting the Launch X431 Pros V+ with the CANFD Connector, you're arming yourself with a time-traveling DeLorean, ready to diagnose cars from today and tomorrow. Talk about being ahead of the curve!

So, dear friends, upgrade your diagnostic game with the Launch X431 Pros V+ and its CANFD Connector – your sidekick for tackling car troubles like a true superhero. Get ready to unleash your diagnostic powers, impress your customers, and have a blast while doing it!

✔️More Faster ✔️More Smarter✔️More Wider Regional vehicle coverage ✔️More Popular ✔️ALL-IN ONE✔️NO IP Limit ! (Same as LAUNCH X431 V+)

LAUNCH X431 PROS V+ is a professional diagnostic scan tool to diagnose full systems in all vehicle systems on E~CU:

>> E~CU CODING:

• Same as other LAUNCH X431 High-end OE-level scan tool , LAUNCH X431 PROS V+ has the capability of E~CU coding to change preprogrammed options in the software, helping you customize your car faster as needed.
• Optimally code your car by changing some settings to fit your needs, such as setting alarms, doors l ocking, etc.
• Access the E~CU to make full use of the hidden features or disable the car’s annoying functions, like 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirrors folding function 5. disable auto start-stop .6. remove/change Speed Limit
• Provide excellent solutions for issues of drivability, power loss, f uel efficiency, etc. to improve the car’s performance.
• Reprogram the adaptive data for certain components after repairs or replacements.

>> ACTIVE TEST (BI-DIRECTIONAL CONTROL ) : LAUNCH X431 PROS V+ car scanner diagnostic tool Features Full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test,turn on interior & exterior lights, sound horn, test door l ock actuators and such.

>> For 2017 and later FCA Vehicles with Secure Gateway Module (SGW): Register with AutoAuth to enable your LAUNCH X431 PROS V+ tablet to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directionals without using a bypass cable.

>> K ey Programming : >>>>Add, Delete & Reprogram K eys, >>>Rewrite smart k eys, All smart k eys lost, Replace smart k ey E~CU, Replace KNOB IGNITION;>>>>Reset K ey: Relearn a k ey. (Note:this k ey programming function is NOT universally compatible .please check compatibility with us if necessary. X431 PROS V+ supports PINCode reading for most cars before 2008 ,for vehicles after 2008,you need to have PINCode to do k ey programming)

>> Full Systems Diagnoses In All Vehicle Systems on the E~CUs : Read/erase codes, view live data, retrieve E~CU version information. It performs active testing and service functions on all systems including E~CM, TCM, ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, f uel system, lighting system and A/C system. The functions cover up to 200,000 models worldwide.

>> 35+ Maintenance information:There are some practical operation cases uploaded by LAUNCH to help you better understand how to carry out the next step. There are wiring diagrams of specific brands of vehicles in the maintenance materials for reference.

>> BRUSH HIDDEN FUNCTION: You will use this function when replacing modules such as audio, radar, windows, etc. It can refresh the car to achieve the effect of recognition module. Different cars support different module functions.

>> MATCHING : This function matches and synchronizes the components with each module after you replace the module,such as: Gearbox Matching / A ir Suspension Matching / Seat Matching / Head light Fitting / Door and Window Initialization Study / Sunroof Initialization / Injector Calibration / Multimedia Video Reset / Cluster Reset / Immobilizer Service / Tire Change Reset...etc (depends on specific car models, not for all cars)

>> Online Repair Resources : Provide more than 200000+ vehicle models' service & repair information, handbook, repair case and operation skill

>> Maintenance Help : Including How-to Videos, operation skills, and user manual, Q&A, Quick start guide, etc.So you won’t have to take it to the Dealers.

✔️More Faster ✔️More Smarter✔️More Wider Regional vehicle coverage ✔️More Popular ✔️ALL-IN ONE✔️NO IP Limit ! (Same as LAUNCH X431 V+)

More than 35 Reset Functions Solving Tricky Problem(Quantity can exceed 100, depending on car model and year)

>> More Than 35 Species, Always Keep Growing (Some vehicles can have more than 130 special functions).

• 1.O IL RESET – Reset the o il life systems every time the o il and o il filter are changed;
• 2. F UEL INJECTOR CODING– Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
• 3.BRAKE RESET – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
• 4.SAS RESET – Perform steering angle sensor calibration and clear records;
• 5.BAT.RESET – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
• 6.ABS B LEEDING– When the ABS contains air, the ABS b leeding function must be performed to b leed the brake system to restore ABS brake sensitivity;
• 7.ELEC.THROTTLE RLRN – Initialize the throttle actuators so that the “learned” values stored on E~CU are returned to the default state;
• 8.TPMS RESET – Tire pressure resetting is required to be performed after maintenance is performed;
• 9.K ey CODING: Help E~CU to recognize the new k eys when you need to add new k eys.
• 10.D.P.F REG – Clear PM (Particulate Matter) from the D.P.F filter through continuous combustion oxidation mode to stabilize the filter performance;
• 11.GEAR(Crank Position Sensor Adaptive) LEARN – Perform gear learning for the car when the engine E~CU, the crankshaft position sensor, or the crankshaft flywheel is replaced. (Available in the system menu and permanently available.Depending on the specific car models, not for all cars, ). and more and more function will be improved and optimized.1
• 12.EPB RESET – Help replace and reset the brake pad. 
• 13.AFS HEADLAMP RESET – Initialize the adaptive headlamp system. 
• 14.SUNROOF INITIALIZATION – The sunroof needs to be reset when the sunroof control unit have communication problem or changed. 
• 15.SUSPENSION RESET – Adjust the vehicle b ody height sensor for level calibration. 
• 16.GEARBOX RESET – Help complete the gearbox self-learning to improve gear shifting quality. 
• 17.TIRE RESET – Set the size parameters of the modified or replaced tire. 
• 18.A/F RESET – Set or learn Air/F uel ratio parameters. 
• 19.ADBLUE RESET(Diesel Engine Exhaust Gas Filter) – Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
• 20.COOLANT B LEEDING – Activate the electronic water pump. 
• 21.NOX SENSOR RESET – Reset catalytic converter learned value stored in E~CU. 
• 22.STOP/START RESET – Set up the automatic start-stop function in E~CU. 
• 23.SEAT CALIBRATION – Calibrate the memory in replaced or repaired seats. 
• 24.TRANSPORT MODE – Deactivate the transport mode. 
• 25.WINDOWS CALIBRATION – Perform door window matching to recover E~CU initial memory.
• 26.AC SYSTEM RELEARN/INITIALIZATION. 
• 27.E.G.R RESET. 
• 28.RESET F UEL ALCOHOL LEVEL. 
• 29.RESET F UEL TRIM. 
• 30.HIGH VOLTAGE BATTERY DIAGNOSTICS. 
• 31.GPF REGENERATION. 
• 32.LANGUAGE CHANGE. 
• 33. ACTIVATE F UEL PUMP.
• 34.DISPLAY OF SCN. 
• 35. INJECTOR INJECTION QUANTILY ADJUSTMENT. 
• 36.VARIANT CODING. 
• 37.LEVEL CALIBRATION. 
• 38.Camshaft/Crankshaft Sensor Relearn. 
• 39.F uel Economy Test. 
• 40.Reset F uel Alcohol Level. 
• 41. Interactive Vehicle Dynamics (IVD) Initialization Sequence. 
• 42.Halt/Resume Transmission Adaptive Learning. 
• 43.Passive Anti Theft System Functions.
• 44.SWS Initialization.
• 45.VIN Registration(Write). 
• 46.Normalise Slide/ Tilt Sunroof.
• 47.Activate ref uel detection. 
• 48.HFM,throttle valve,cooler bypass.
• 49.Idle adjustment.
• 50.Initialisation of rain-light-solar-condensations sensor.
• 51.Remote k ey / ignition k ey - Blcok/enable. 
• 52.Replacement partuculate filter.
• 53.CBS Reset UDS.
• 54. Change vehicle system language.ect.!! Keep Growing with UPDATES !!>>>>>(depending on the specific car models, not for all cars, ). and more and more function will be improved and optimized.

>> One-Click Auto VIN Detect: Smart AutoVIN technology for fast and precise identifying vehicles in one touch to scan E~CUs, acquire vehicle info and run diagnostic on selected systems.Quickly get your car’s information,save your time.

>> 12 IN 1 Live Data Stream Analyse in Graph: LAUNCH X431 PROS V+ scan tool shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter.

>> 2 Years Free Online Update: No subscription fee! This code reader is backed by LAUNCH’s promise for Online updates to keep the software current. Only the official scan tool can get updated.

>> Automatic Diagnostic Report Print & Share: Health Report will scan all vehicle modules and give you a status list for each modules condition .This diagnostic tool can automatically generate a diagnostic report when diagnostic work is successfully finished.The reports are saved to the internal memory for later review. The reports are able to be saved in PDF format, and as the tablet is equipped with WIFI, these can be emailed to the office or directly to the customer.

>> One to One Online Feedback- In-Time Problem Solving: LAUNCH Scanner provides you with a Feedback function to share any problems you encounter in the process of diagnosis. We will make every effort to perform a no-delay problem solving and makes improvements on product quality according to your problems and suggestions, thus offering you a higher quality user experience.

>> View History: Once a vehicle diagnosis is performed, LAUNCH X431 PROS V+ will record the every detail of the diagnostic process.you can record/review/playback live data anytime .The History function provides quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch

>> Remote Diagnosis: Configures LAUNCH X431 PROS V+ as an I/M(Instant Messaging) tool, which enables technicians to exchange repair experience and perform remote assistance more conveniently.

>> Maintenance Help: Including How-to Videos, operation skills, and user manual, Q&A, Quick start guide, etc.

>> What If I meet with Issues during the diagnosis ?: For any problems found during the diagnosis, submit the feedback immediately. LAUNCH professional experts will provide perfect solutions for you as soon as possible .

>> 100+ Repair Functions For Specific Vehicles (in-vehicle catalog ) Furthermore, the Launch scan tool also developed 300+ functions for specific models. Compared with other diagnostic scanners that can only do the Reset function, the bi-directional scanner can finish deeper and wider Reset, Regeneration, Initiation, Matching, Calibration, Replacement, etc.

2023 Elite LAUNCH X431 Car Diagnostic Scanner for All Cars with OE-LEVEL Full System Diagnostics & More than 35+ Reset Services & E~CU Online Coding

200000+ Vehicles Supported,200+ Car Makers Supported ! (Almost cars on the world)(Update car software to 2021/2022/2023, including cars, SUVs, minivans, 12v light-duty trucks.):

• Amarica car models: --FORD,LINCOIN,GM,BUICK,CADILLAC,CHEVROLET,CHRYSLER,DODGE,JEEP,HM
• Europe car models: -- BENZ,SMART,SPRINTER,BMW,VW,SKODA,AUDI,OPEL,LAMBORGHINI,PORSCHE,MAYBACH,EURO FORD,LANDROVER,DR,BENTLEYRollsRoyce,ROVER,MINI,VAUXHALL,FERRARI,FIAT,Abarth,LANCIA,Alfa,Romeo,Maserati,BUGATTI,PEUGEOTCITROEN,RENAULT,SAAB,VOLVO,OPEL,Dacia,SEAT
• Malaysia car makes: -- PERODUA(PERODUA),PROTON ; IRAN car makes: --IKCO,MVM,SAIPA; Australian car makes: --Austford, Holden ;India car makes: -- TATA,MARUTI,MAHINDRA,India HM ;Russia car makes: --GAZ, VAZ; Brazil car makes: --FIAT; GM; ASIAN CAR makes: --SAMSUNG,DAEWOO,SSANYYONG,HYUNDAI,KIA,HONDA,Acura,TOYOTA,SCION,LEXUS MAZDA, NISSAN, Infiniti, JPISUZU, TLISUZU, DAIHATSUSUZUKI,MITSUBISHI,SUBARU,CHANGCHENG,HUACHEN,ZHONGXING,JACTY,QIRUI_TY,ISUZU,JINLONG,CHANGAN,LIUWEI_TY,XINKAI,JPISUZU,ZHONGSHUN,HAOQING,HAFEI,XIALI,CHANGHE,ZHONGTAI,Kowloon,Brilliance,LIFAN,WEILI,FLYER,SSANGYONG,JIAO,WEILI,LUXGEN.BYD,CHERY.ZOTYE.etc. [ CONTINUOUSLY GROWING Vehicle Coverage WITH UPDATES ]

What Comes With ALL-IN-ONE LAUNCH X431 PROS V+ Bi-Directional Scan Tool

• X-431 PROS V+ host,QUICK START GUIDE, Papal USER MANUAL, PIN envelope, Storage Case, CLIPPER, FUSE, BLUETOOTH ADAPTER (DBScar-4/DS301), SWITCHING ADAPTER, AIT I OBD16 Extension Cable, USB A to Micro cable; 3 Adapter Plugs applicable for US,UK,EURO.
• 14 Connectors :TOYOTA-17, HONDA-3, MAZDA-17,FORD-6+1,SSANG YONG-20 , CHRYSLER-6, SUBARU-9 , KIA-20, DAEWOO-12 ,GEELY-22 ,GMVAZ-12, DAEWOO-12, BMW-20, BENZ-38
• 12 Cables : GAZ , OBDII-16 EXTEND CABLE , SSANG YONG-14, SUZUKI-3, AUDI-4, FIAT-3, MITSUBISHI HYUNDAI-12+16, OBD1 ADAPTOR, BENZ-14, NISSAN-14+16, DAIHUATSU-4, POWER CABLE CLIPS.

NEW OPTIONAL FUNCTIONS: (You can perform more comprehensive vehicle inspections with LAUNCH X431 PROS V+ ,need EXTRA-BUY )

1. X-431 ADAS Mobile/PRO: Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system.
2. VIDEOSCOPE: Examine and clean difficult-to-reach car areas normally hidden from sight, such as spark plug holes, engine cylinders, and small parts
3. TSGUN: Activate and match with all 315 MHz / 433 MHz tire pressure sensors / Reset, relearn and reprogram tire pressure sensors fast /Diagnose the tire pressure issues and turn off the warning light by relearning and programming your new tire pressure sensor./Reprogramming LAUNCH LTR01 sensors AND other Unencrypted sensors with unlimited times./ Read tire pressure, tire temperature and battery status accurately
4. X-PROG 3: turn this X431 diagnostic scanner into a capable IMMO service tool, providing fast, easy, and intuitive k-ey pro-gramming for VAG group vehicles with 2/3/3.5 gen. IMMO, and most Asian cars with low-level antitheft systems; also to have completed IMMO & K-ey Pro-gramming (read & write 1200+ EEPROM and MCU chips, etc.) for VW/Audi/Skoda/Seat models manufactured after 2008 with 4/5/5.5/6 gen. IMMO system.
5. X431 PRINTER: Print out diagnostic data/ reports
6. BST360 Battery Test clip Analyzer :can be used for Battery Cranking system Test, Battery Charging system Test, Battery Health Test.