Package Include:

1 × Window regulator with Motor

Feature:

Condition: brand-new

Placement on Vehicle: Rear Right

Terminal Quantity: 2-pins Plug

Type: Regulator & Motor Assembly

Attachment Type: Bolt On

Frame Material: Metal and Plastic

Part Number:

LC6272590A, MA1551113

Application for:

For Mazda MPV 2000-2001 V6 2.5L Standard Passenger Van with Motor Rear Right
For Mazda MPV 2002-2003 V6 3.0L Standard Passenger Van with Motor Rear Right
For Mazda MPV 2004-2006 V6 3.0L Mini Passenger Van with Motor Rear Right

Note:

Use the compatibility chart to identify your vehicle.

Visually compare the part you are replacing with our pictures.

Match reference numbers from the Item specifics section above.

Find the year,make, model, engine and trim in vehicle application to ensure.

Install the window regulator as follows: 

Part1 Disconnecting the Window from the Motor

1.Remove the interior door panel.   

2.Gently remove the plastic door cover. 

3.Locate the window mounting bolts.  

4.Move the window if necessary to access the bolts. 

5.Remove the bolts while a friend supports the window.  

6.Raise the window up into the door frame. 

7.Use masking tape to secure the window in place. 

Part2 Disconnecting the Motor and Regulator

8.Remove the window regulator bolts.  

9.Locate and remove the window motor mounting bolts.

10.Disconnect the motor wiring harness connector.  

11.Remove the motor and regulator through the access port. 

12. Connect the regulator to the new motor. 

Part3 Installing a New Power Window Motor

13.Slide the new motor and regulator back into place.  

14.Replace the mounting bolts. 

15.Reconnect the electrical connector.   

16.Remove the masking tape and lower the window back down. 

17.Insert the window mounting bolts.   

18.Reinstall the plastic liner and interior panel.