LCD Smart Digital 60A PWM DC Motor Speed Controller Wireless Remote Control
Description:
1-2-3-4-5-6-7-8-9 E function settings are as follows:
Slow start time setting function 1: 000-100 slow start to 100% speed time is adjustable between 0-10 seconds. The default is 1 second.
Slow stop time setting function 2: 000-100 slow stop time is adjustable between 0-10 seconds. The default is 1 second.
Speed lower limit setting function 3: 000-080 the minimum speed is adjustable between 0-80% and is less than
the maximum speed setting value. The default is 0.
Speed upper limit setting function 4: 000-100 the maximum speed is adjustable between 0-100% and is greater than the minimum
speed setting value. The default is 100%.
Acceleration/deceleration value setting function 5: 001 002 005 010 015 020 025 the speed changes by 1%, 2%, 5%, 10%, 15%, 20% and 25% each time the acceleration/deceleration key is pressed.
Motor running time setting function 6: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds.
Motor stop time setting function 7: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds.
Motor start-stop cycle times function 8: adjustable between 1-999 times. The default is 999 times.
Limit mode selection Function E: E1 Infinite position Default infinite position
E2 Press to start the motor to rotate forward and to the positive limit, the motor to stop, press to start to reverse
E3 Press to start the motor forward rotation, forward rotation to positive limit motor reverse rotation, reverse rotation to negative limit motor stop
E4 Press to start the motor forward rotation, forward rotation to the positive limit, the motor reverse rotation, cyclical work
Manual and automatic mode selection Press the MENU button 1 to display 0 to enter the manual and automatic mode selection 1 is manual mode 2 is automatic mode Press the plus and minus keys to switch Press RUN/STOP to save and exit
Specifications:
Item Name: Motor Speed Controller
Input Voltage: DC 10V-55V (the specific voltage should be equal to the rated voltage of the motor)
Output Voltage: Linear Under Load
Instantaneous Current: 60A
Continuous Current: within 40A
Type of Speed Regulation: Flow Regulation
Speed Adjustment Method: Press +/-
Wireless Remote Control: Support
Timing: Yes
Slow Start and Slow Stop: Can Be Set
Speed Digital Display: 0-100 Percentage Table
Speed Adjustment Range: 0-100%
Control Frequency: 15KHZ
Battery: 1 x CR2032 Button Battery(not Included)
Wiring Type: Fence Type Terminal Block
Support Motor: Brush Motor
Module Size: 14.8cm x 9.5cm x 3.6cm
Panel Size: 14.2cm x 8.8cm
NOTE:
1.lmport duties, taxes and charges are not included in the item price and the freight. These charges are the buyer's responsibility.
2.Please check with your country's customs to determine what these additional costs will be prior to bidding/buying.
3.Please leave your valid phone number when you make order, otherwise we can't guarantee the package would arrive smoothly.
RETURN
1.Return accepted in 30 days after you receive the item. The buyer need to affordthe return postage fee who also need to return it to our designated place.
2.Return package must be in the original packaging, item must be in new condition.Missing parts or any damaged by the buyer will not give any return.
3.Within warranty period, all repair parts will be free, but the buyer need to pay for the freight.
