USA SELLER - QKMall LLC
 |
Description:
Description:
This test can be a USB charging current, voltage, discharge capacity, intelligent devices.
It can be very easy to find digital device charging problem.
Tester three dimensional size 60 X 28.5 X 15mm (without cable), about 15cm length of the line.
The only button on the tester is used to view and test data switch, the tester can store 10 groups of test data
Specifications:
1. Input Voltage: 3V - 7V
2.Input current: <3.4A
3. Parameters that you can test: Voltage of battery. Current of battery, value of discharging capacitor.
(Total ten parameters)
4. Communication function: Yes
5. Parameters adjusting function :Yes. Equipment for parameters adjustment: One electronic load,
one constant current source. Voltage of constant current source should be set to 8.5V
There are 3A, 2A, 1A and 0.3A models for current adjusting.
Here is a example for 3A:
When you set electronic load at 3A model, the current will be adjusted step by step.
It will cost you about 10 seconds and you can see the result changing procedure in the LCD screen.
When you see the 3A result shown in LCD screen, the adjustment process is finished. You can shut
off the electronic load and the parameters will be saved automatically.
6. Clean the data : Push the button until the parameters changed to next sets of parameters. Then release the button.
Then the next sets of parameters will be started and they will start from zero.
7. Check the parameters : Quick beat the button double times(within 0.5s), then it is checking model.
The LED background will be flash.Then you can see the next set of parameters in LCD screen. Quick beat the
button double times again, you release the parameters checking model. LED background be be light with flash.
8. Over voltage or under voltage : An arrowhead will be shown in LCD screen and LED background will flash.
Push the button and LED will be light without flash.
It will last 30s.
9. Turn on mode l: The LCD screen will show all parameters within 1s when you connect power supply
by Micro USB or male plug of USB with wire.(It is to check whether the LCD screen is good or not).
Then you can see the parameters used last time(capacitor and which set of parameters). You also can
see the current voltage, current and over voltage or under voltage. Please see following illustration.
USB output port can be connected to a data line, a discharge resistor or the like cable devic
comprising a data communication function, the data does not affect the data transmission line.
Test specifications, voltage can not exceed 7V, current can not exceed 3.5A.
Note:When the voltage is lower than 4.7V on the instrument display or higher than 5.3V,
the LCD screen will flash, it does not affect the use.
Application examples
Because mobile phones and digital devices at low battery or full charge, the current and voltage is not a stable value,
the application example of the discharge
device is a USB 1A or 2A discharge resistor.
Included:
1 X LCD USB Voltage Current Detector Mobile Power USB Charger Tester Meter
| Item Specifics | |
|---|---|
| Brand : | Unbranded/Generic |
| UPC : | Does not apply |
| MPN : | Does Not Apply |
Payment:
- We accept payment through Paypal ONLY.
If you do not have Paypal account, please registered with (https://www.paypal.com) Payment must be received within 5 days after auctions ended. Please do not bid if you are not intending to buy. Unpaid dispute will be filed to ebay for the non payable bidders.
Shipping and handling:
- We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- Items will be shipped within 1-3 business day when we received payment.
- Delivery time depends on destination and other factors;
- International buyers please note:
- a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
- b.Please check with your country's customs office to determine what these additional costs will be prior to buying.
Return:
- We can exchange the item within 14 days after you received it if it is defective. Returned item must have all original packaging and accessories with Approval Return Code.
- Buyer are responsible for the returning shipping costs. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.
- It may take up to 3 business days to process your return after we receive your product.
Customer Services:
- Customer Satisfaction is invaluable for us. Any questions, please let us know first.
- We will reply all you questions in one working day. If you have questions or problem about your purchases, full support will be given and QKMall LLC will try to sort all your concern out.
- Any question, please send us message via ebay
USA SELLER - QKMall LLC
|
Shop Category
Picture
New List Item
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
|
LCD USB Charger PC Battery Capacity Power Current Voltage Tester Meter White
Payment:
Shipping and handling:
Return:
Customer Services:
Copyright of QKMall LLC. All rights reserved. |
||||||||||||||||||||||||||||||||||||||||
Powered by SoldEazy
