CLEARANCE! CLEARANCE! CLEARANCE!STOCK EXTREMELY LOW!!! DON'T MISS OUTTitanium motorcycle bolts
Titanium Racebolts
Paros Motorcycles Titanium Drain/Sump Bolts are manufactured from grade 5 Titanium Ti-6AL-4V and are suitable to replace both grade 5 and grade 8 steel bolts,
We have them machined to incorporate a magnet at the tip which is designed to capture any particles or metal shaving that may be present as a result of general wear and tear in your motor. This magnetised steel stud will help protect your engine. Once the titanium drain/sump bolt has been machined we drill the bolt head to enable lock wiring if required as an additional safety mechanism in the event the bolt may become loose.
Head Style: Hex Head Race Drilled Thread
Diameter: 12mm
Thread Pitch: 1.50mm
Thread Length: 15mm
Head Diameter: 21mm
Head Height: 8mm
Length: 15mm
Magnet Pin Length: 5mm
Socket Size: 17mm
Pack Quantity: 1
FITS THE FOLLOWING MODELS:
- Ducati Monster 996 S4R 2003-2006
- Honda CB600 Hornet 1998-2013
- Honda CB650R/CBR650R 2019-2024
- Honda CBR1000RR Fireblade 2004-2019
- Honda CBR1000RR-R Fireblade 2020-2024
- Honda CBR600F 1999-2000
- Honda CBR600F4i 2001-2002
- Honda CBR600RR 2003-2012
- Honda CBR900RRN-RRS 1992-1995
- Honda CBR954RR2-RR3 2002-2003
- Honda VFR750F 1990-1997
- Honda VFR800FI 1998-2001
- Honda VFR800 V-TEC 2002-2005
- Honda VTR1000 F Firestorm 1997-2006
- Honda VTR1000 SP1 2000-2001
- Honda VTR1000 SP2 2002-2005
- Kawasaki Ninja 250R 2008-2012
- Kawasaki Ninja 400 2018-2024
- Kawasaki Ninja 650/R 2017-2024
- Kawasaki Ninja H2/H2R 2015-2024
- Kawasaki Ninja Z H2/SX 2020-2024
- Kawasaki Z1000 2003-2022
- Kawasaki Z1000 SX 2011-2016
- Kawasaki Z900/RS 2017-2024
- Kawasaki Z750 2007-2009
- Kawasaki Z650RS 2022-2024
- Kawasaki ZX-10R 2008-2024
- Kawasaki ZX-6R 2003-2024
- Kawasaki ZX-7R P1-P7 1996-2003
- Kawasaki ZX-4RR 2023-2024
- Kawasaki ZZR1400 2006-2011
- Kawasaki ZX-14
- Yamaha YZF-R3 2015-2024
- Yamaha MT-03 2016-2024
*DISCLAIMER PLEASE CHECK THE MAGNET PRIOR TO INSTALLING, WE CHECK EVERY MAGNET TO MAKE SURE THEY ARE GLUED IN PROPERLY BUT PLEASE DOUBLE CHECK YOUR MAGNET PRIOR TO INSTALLATION AND PERIODICALLY WHEN SERVICING.
ERGO 5800 metal glue made in Switzerland is the glue adhesive used to secure the magnet in place, we recommended this glue if your magnet ever becomes loose for any reason. Or similar such as Loctite 480 instant metal magnet adhesive.
