Invoice Terms

No Labour Warranty. All parts must be installed within 30 days of delivery or pick up in accordance with procedures set forth within this document. All warranty claims must be validated with original receipts of purchase. At Mintech Spares’ discretion, we will repair, replace, or refund any defective part to the original purchaser, providing all warranty guidelines & procedures have been followed. Exclusions.

1 - Parts installed in vehicles for off road use, or street legal vehicles modified beyond factory specifications are not covered by this warranty.

2 - Parts installed in commercial or fleet vehicles, marine use and in any application not intended by the original manufacturer are not covered by this warranty.

3 - Incidental or consequential damages including but not limited to the cost of related parts, loss of income, travel expenses, rental, towing, and diagnostics fees are not covered by this warranty.

4 - This warranty will not cover damages or failure arising directly or indirectly due to improper installation or related vehicle issues, misuse, abuse, maintenance neglect, environmental conditions, or accidents.

General Limitations

1 - Mintech Spares reserves the right to have the part inspected to ensure that all the provisions stated within the warranty have been met and to inspect the part prior to repair, replacement, or refund.

2 - Any repairs or removal of the part before Mintech Spares or its contractor can inspect the part will void the warranty.

3 - Warranty is valid to original purchaser only. Warranty is not transferable. Any part returned must be in same condition as when purchased.

4 - This part may have accessories that are attached and must be removed or switched for proper installation. This is solely the responsibility of the installer as such accessories are not covered under this warranty.

5 - Warranties are applicable for ONE-TIME use, Products repaired or replaced under warranty for which a warranty claim has been paid by Mintech Spares (regardless of the type of warranty claim made) shall thereafter only be warranted as a 3 months part repair or replacement LIMITED WARRANTY *** unless a new extended warranty is added (then purchased by the customer) to the repaired or replacement part. Offering a new extended warranty on repaired or replaced part is up to our discretion.

6 - This warranty is void if any of the following occurs

(A) Part is installed in an application not intended by the vehicle manufacturer.

(B) Failure caused by towing a trailer unless your vehicle is rated by the manufacturer for towing.

(A) Part is installed in an application not intended by the vehicle manufacturer.

(C) Failures caused by non-covered components, improper installation, abuse, misuse, racing, poor workmanship, improper or lack of maintenance.

(D) Failure caused by or related to collisions, theft, vandalism or any act of God.

(E) Warranty on all mechanical parts including but not limited to Engines and Transmissions is void unless installed by a certified & qualified technician. Engines This warranty is limited to defects of the engine block, heads, valves, rockers, lifters, pistons, crank and cam shafts and other internal lubricated parts.

All external parts left on engines are not covered under this warranty such as sensors, petrol or diesel injectors, throttle body, timing belts, gaskets, seals, exhaust or intake manifolds, water pump, coil packs or any part not internally lubricated Engine installations follow the procedures below.

Replace the following parts if applicable: timing belt, water pump, thermostat, spark plugs, fluids, oil and oil filter. (Please see manufacturer specifications for correct oil grade and filling quantity.)

Warranty is contingent upon oil and filter change (per manufacturer’s specifications as to type) at installation and every 5,000 miles thereafter.

Customer must provide proof of service or warranty is voided. Overheating and/or improper installation voids all warranties.

Transmissions: Replace the following with new parts: Flush or replace transmission cooler and lines. Transmission Oil and Filter Where Applicable. Adjust shifter and kickdown cables and linkage if applicable. Clear all computer fault codes. Manual transmissions, Transfer Boxes and Differentials follow the same procedure as above if applicable.

All the above installation should be in accordance with manufacturer guidelines including proper oil grade and fill levels of fluids and any technical service bulletins and updates.

Warranty covers slippage, shifting failures and/or bearing noise. On CVT Automatic Transmissions warranty is void if transmission has not had the correct fill quantity and drive cycle procedure followed by a certified and qualified technician prior to customer use. Improper installation voids all warranties. Customer must provide proof of service or warranty is voided.

Returns Terms & Conditions

If you need to return an item, please open the return, and select the reason "I changed my mind". Once that is done a return label will be issued.

All parts are covered by our 30-Day Money-Back Guarantee.

If any part supplied by Mintech Spares proves to be faulty during this period, it may be returned for an exchange. If no exchange is available within 48 hours a refund will be given. Any part(s) correctly supplied by Mintech Spares and returned after 14 days are subject to a 20% Handling Charge applied to the Refund amount.

All goods should be inspected upon delivery before signing to ensure that the item has not been damaged during transit.

If goods prove to be damaged, do not sign, refuse delivery & contact Mintech Spares within 1 working day. This is to ensure that, if necessary, a claim can be made against the courier company. Goods once signed for are to be returned at the Customers expense.

In the event that a part is supplied as ordered but the customer has ordered incorrectly, we must be contacted immediately via eBay message, and the part returned to Mintech Spares within 7 days of purchase at the cost of the customer.

Refunds will only be made upon the return of the goods to our premises.

Please ensure all goods are checked thoroughly before being signed for. Refunds are not always possible for goods that have been damaged whilst in transit. The words unexamined or unchecked on the delivery note/docket are not acceptable.

Mintech Spares will not be held responsible for the refund of goods damaged in transit if they have been signed for as in good condition.

By clicking "MAKE OFFER" or "BUY IT NOW" on this website, you agree to be bound by these terms & conditions. Title to the goods shall remain with Mintech Spares until paid in full with cleared funds.

SHIPPING Terms & Conditions

Postage and Packaging is complimentary for UK Mainland (excluding Scottish Highlands in some cases, please contact us for conformation). We have a full time devoted dispatch team who provide a quality service to ensure parts arrive with you in the same condition they leave us.

Worldwide Shipping can be quoted and arranged on request. eBay's Global Shipping Programme is a preferred method provided by eBay themselves. Any International Orders (Outside of the UK) please contact us prior to purchase to confirm an item is applicable for export.

For International Orders any Customs Charges or Taxes applied is the sole responsibility of the buyer. Mintech Spares are in no way responsible for any Customs Charges or Taxes applied to International Orders.

Orders are dispatched by Royal Mail or Parcelforce for Small Items and via TNT, Fedex or DX for Large Items. Most items will be dispatched on a 48 Hour service, please note dispatch times we have added to any item(s) as these can differ from one listing to another depending on item type.

If you require a faster delivery service than estimated please select any available express shipping options upon checkout, these may be available at an extra cost.

Mintech Spares

MINTECH SPARES UK LIMITED are the UK’s largest New model Mini Breakers and recyclers, established now for over 12 years.

MINTECH SPARES UK LIMITED currently hold the largest stock of used Mini parts in the country and deliver across Great Britain every day, we also supply parts to customers overseas.

MINTECH SPARES UK LIMITED moved to purpose built new premises in 2009 to increase capacity and to provide workshop facilities to compliment the busy BMW Mini vehicle breakers side of the business.

In 2011 MINTECH SPARES UK LIMITED achieved official Depollution Centre status by becoming authorised by the Environmental Agency as a End Of Life Vehicle Centre.

MINTECH SPARES UK LIMITED have a strong racing heritage and have built, prepared and maintained the 2011 Winning Mini Challenge John Cooper Works Car Driven by Chris Knox, also many Track Day cars and race prep cars.

As technology continues to be an integral part of any modern vehicle dismantlers MINTECH SPARES UK LIMITED constantly re-invests heavily into new systems and technologies to maintain its status as the UK’s number one Mini breaker.

Opening Times

MINTECH SPARES

Monday To Friday 8:00 am - 4:00 pm