NINTENDO GAMECUBE - DVD-ROM CERAMIC CAPACITOR KIT FOR ALL DRIVES

dreamics-master

CONTACT SELLER SEE ON EBAY

dreamics-master

DESCRIPTION

Dreamics Master offers you this complete kit of ceramic capacitors compatible with all Nintendo GameCube DVD-ROM drives. It allows you to replace all the capacitors for all existing DVD-ROM drives whatever your GameCube motherboard model DOL-001 & DOL-101.

All the capacitors in this kit are from renowned Japanese manufacturers, they are of highest quality and are all Japanese-made "Made in Japan".

- They have an extremely long lifespan (several decades).
- They'll never leak.
- They are non-polarized and therefore easy to install.
- They are highly heat-resistant.

The installation will be definitive, you'll never need to replace the capacitors on your DVD-ROM drives again.

Most GameCube consoles were manufactured between 2001 and 2005. The DVD-ROM drives are located above the GameCube processors, which generates a lot of heat. Replacing these capacitors is a good thing if you want to preserve your console for decades to come.

Ceramic capkits for Nintendo GameCube DVD-ROM drive will be sent via priority international shipping with tracking number.

TUTORIAL

Installing the ceramic capacitors is ultra-simple, as these capacitors are not polarized, you just need to place them in the right locations.

INSTALLATION TIPS

Here are a few tips for a flawless installation:

1/ Use desoldering braid to ensure that connection points are as flat as possible.

2/ Clean the connection points with alcohol or acetone to keep the surface as clean as possible.

3/ Each capacitor has two connection points.
Add tin only to one of the two connection points, as this will enable the capacitors to be positioned and aligned correctly.
By "sliding" the capacitor from left to right as shown in the image below:

You can then solder the capacitor permanently.

If you have any questions, don't hesitate to ask.