OEM Code Alarm Remote Key Fob Keyless Car Starter GOH-PCMINI ELVATCC CA6551

u.s.autoparts

$12

CONTACT SELLER SEE ON EBAY

u.s.autoparts

$12

DESCRIPTION

Stock #: 560A

See pictures for an example of what you will receive

One (1)

Aftermarket remote keyless entry fob alarm

Transmitter control clicker keyfob controller replacement

Functions at 100% Tested & Guaranteed

Code Alarm / Jeep / Chrysler / Ford / Dodge /

Mazda / Subaru / Mercury / Lincoln

FULLY TESTED AND REFURBISH 1-Button OEM Code Alarm Remote] – Works with all Code Alarm Systems with FCC ID: GOH-PCMINI 4Q 4P, G0H-PCM1NI, ELVATCC, ATCN-1 and P/N’s: H001SXA200 H001SAG000, or H001SXA100

FCC ID: GOH-PCMINI

Interchangeable FCC IDs

GOH PCMINI	ELVATCC
GOH-PCMINI-4Q

Interchangeable Part #s

07S1BP	07S1BPR
AVX-1B4S
3671A10247510	3671A10308381

Interchangeable circuit board #s:

ATCD-1	ATCN-1
ATCD

Frequency: 433 – 434 MHz

LED color: Red

1 button

Battery: (2) CR 1220 CR1220

Compatible with the following systems:

APS900

APS901

APS901C

APS901N

AS9055C

AS9055T

AS9233ST

JKRS1

JKRS1T

PRO9051N

CA421

CA420A

CA420

CA440TW

CA440SS [Works with Select Security Systems Including:] - APS900, APS901, APS901C, APS901N, AS9055C, AS9055T, AS9233ST, JKRS1, JKRS1T, PRO9051N, CA421, CA420A CA420, CA440TW, CA440SS, CA1550, CA1551, CA1552, CA1553, CA1BTW, CA1BTW5, CA4552, CA4553, CA4554, CA4555, CA6550, CA6551, CA6552, CA6553. CA1550, CA1551, CA1552, CA1553, CA1BTW, CA1BTW5, CA4552, CA4553, CA4554, CA4555, CA6550, CA6551, CA6552 and CA6553.

[User Programmable – Instructions in Listing Details] - This remote can be user programmed and comes complete with electronics and fresh battery installed.
[Guaranteed Programmable + Fresh Battery Installed] -Compatible with your vehicle if your existing remote appears identical to any of the remotes shown in the listing photo and is equipped with the auto start feature
[Programming Instructions Included in Listing Details Below] - No need to pay your dealer or locksmith to program the remote to your vehicle. See listing details for programming instructions.

Programming Instructions:

METHOD #1

NOTE: All applications require that tach be programmed.

The unit will not operate unless tach is programmed. If an attempt is made to start the vehicle via the remote start without first programming tach, the unit will flash the parking lights 7 times indicating tach has not been learned and stored.

If the tach rate is not properly programmed to the specific vehicle, the unit may not realize that the vehicle is running in certain instances and could re-engage the starter motor.

The Remote Car Starter will learn the tach rate of most vehicles single ignition coils, multiple coil packs, and or single injector.

TO LEARN TACH:

1. Turn the ignition key to the ON position.

2. Press and release the program push-button switch 3 times.

3. Immediately turn the ignition key OFF.

4. Hold the program push-button switch ON, then start the vehicle using the ignition key.

5. When the unit senses the tach signal, the parking lights will begin to flash.

6. Release the program push-button switch. The parking lights will turn on for 3 seconds to indicate that the tach signal is stored and the unit is now out of the program mode.

METHOD #2

Turn the ignition to the on position.
Press and release the programming switch 3 times.
Press and hold, for 3 seconds, the button of the transmitter you wish to add until the parking light flashes, indicating the transmitter has been learned.

Repeat step 3 for up to a total of 4 transmitters.

Note: Do not allow more than 15 seconds to lapse between steps or the program mode will be automatically exited and you will have to start over.

Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days.

PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).

100% Guarantee Remote Shipping / Return Policy

Warranty/Returns:

1. We have a 30 day return policy.

2. All returns for replacements and refund need an RMA #.

3. Please contact us before returning items so we can give you the RMA # and the proper return address.

4. No refunds / replacements will be granted without an RMA#

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

Does this keyless remote entry come with a battery?

Yes. It will have a working battery installed.

Battery Condition:

A. All remotes sold on Keyless4u include working batteries.

B. Installed batteries are not tested for battery life- they are simply working.

Some are new and some are used.

Your vehicle will be installed with one of the following keyless entry systems:

a. Standard Keyless Remote Packages: Installed at time of manufacture.

b. Optional Keyless Remote Packages: Installed by a dealer.

c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.

d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.

.
.
.
.
.
.
.

Powered by
The free listing tool. List your items fast and easy and manage your active items.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.