300% Brighter
More light for your wheels, more light for your rims. Bring your wheels to life with amazing 3-into-1 Multi-Color LEDs
Complete Color Customization
Tonight green, tomorrow red. With so many colors available, your rims could look different every night!
E-Z Programming
Let them know which car is yours from over 80ft away! Once installed, easily select the color and pattern you want with our one feature-rich E-Z Remote.
- Multi-color selections
- Brightness dimming selections
- On the E-Z Remote, our modes are: Solid, Single Color Strobes, Multi-Color Fade, Multi-Color Cycle.
Built Tough. Built for the Road.
AURA™ LED Strips are built to last. Constructed and filled with dense silicone. Our kits are designed to protect against road debris, moisture and anything life can throw at it.
Easy & Neat Installation
We include everything you need to get your boat easily setup with pre-made light strips, adhesive, mounting kit, extension wires and in-line fuse power harness. In-line fuse power harness allows a direct battery connection a protected power pull, so you don't need to worry about an overdrawn on voltage. The control box operates at a maximum voltage of 12V.
Waterproof Connectors are here to stay!
Get OPT7's AURA™ Wheel Well game-changing lighting system that installs in minutes and lasts for years to come!
NOTE : The LED connectors have been updated to waterproof cap. If you would like to upgrade to AURA PRO Control Box, please reach out to our Customer Support Team.
AURA™ Original Kit Includes:
- 1 x 21-Key Handheld Remote
- 1 x AURA™ V2 Control Box (P) + 4-Pin Round Waterproof Pre-Attached Connectors
- 4 x 24" Single Row LED Strips with Adhesive Back
- 4 x 13ft Extension Wires
- 1 x 10ft In-line Fuse Hardwire Power Harness
- 1 x Pack of Mounting Kit and Zip Ties
Strong Adhesive Tape
Our premium strip kit features strong, high-quality binding tape.
Tips on Applying Adhesive LED Strips Securely:
1. To prep the area you wish to mount the LED strip, dampen a clean cloth in warm water, then scrub the surface to remove debris. Any grime left behind could prevent the LED strip from sticking, so thoroughly clean the surface until it’s free of dirt and scuff marks.
2. Remove any moisture left over with a clean, dry cloth or give the surface 30 minutes to air dry. Next, use the adhesive booster that we provide to wipe the area for a ready to stick surface.
3. Peel the adhesive backing from one end of the LED strip. Position the LED strip carefully on the desired surface, ensuring proper alignment. Press firmly to secure, working gradually from one end to the other. For best results, avoid repositioning the strip once it's adhered.
4. Align the arrows on the pins to ensure secure connections during installation. This step is crucial as it prevents improper installation, which has been causing color issues for some users.
