Original bulb inside Projector Lamp Module for PANASONIC PT-EX510L
| 1. The Best Price & Free Shipping Nationwide MultiGlare lamp module gives the great quality of overall performance, including brightness, duration, etc. for the best price and free shipping national wide. 2. The Widest Product Coverage: Out of the current active 5,000-6,000 projector models which need replacement lamps, MultiGlare supports more than 3,000 models of projector, and increasing supported models consistently. 3. Stable Supply, Local Inventory & Fast Delivery MultiGlare commits a stable supply of lamp modules as there is always a large stock of lamps kept as MultiGlare inventory for urgent needs. 4. The Longest Warranty & Low RMA Rate All MultiGlare lamp module are through the most rigorous tests of lamp manufactures. The quality of MultiGlare lamp module is guaranteed. All MultiGlare lamp modules (with housing) come with 180-Day warranty and bare lamps (without housing) come with 90-Day warranty (except some genuine OEM lamps, that is subject to it's manufacturer warranty). |
| Product Type | Complete Unit - Original Bulb + Tailor-made Housing |
| Part Number | ET-LAE300 |
| Compatible Models | PANASONIC PT-EX510L |
| Wattage | 400 Watts |
| Estimated Lamp Life | 3000 (Normal Mode) / 4500 (Eco Mode) Hours |
| Warranty | 180 Days |
| Note | An "original bulb" or "original bare lamp" refers to the same bulb that was originally installed in a brand new projector when it was shipped from the manufacturer, while anything else is considered a compatible bulb. |
A long lasting and well-performing lamp requires a good quality burner and reflector. But most importantly, adequate cooling makes a big difference for the lifespan of the lamp. For instance, operating a projector / TV in a hot, humid or poorly ventilated environment can shorten the lifespan of the lamp. For some projectors, this is even more of a concern, such as compact or portable projectors, as they are more physically compact and therefore have poorer heat dissipation properties. Therefore, always check the cooling fan and air filter when you replace the lamp. Keep in mind that the cooling capability of the projector / TV will diminish over time with usage, cooling fans will wear if not serviced (ie. re-oiled, cleaned or replaced), and an unfunctional air filter can block the air flow. You also need to clean the lamp cabinet as the built-up dust can trap heat inside the projector / TV.
The projector has a built-in counter which keeps track of the lamp operating time. When the cumulative operating time reaches a certain point, it causes the replacement warning message to be displayed. Therefore, the counter needs to be reset after the lamp has been replaced with a new one. You can do this using the menu displayed on screen. For some model of the projector, you must complete lamp reset within 10 minutes of switching power ON, otherwise, the projector turns itself off automatically.
For some model of the projector, when the lamp exceeds the limit hours of service, the projector cannot turn on and the menu is not displayed. If this happens, you need to find out the information in your user manual to clear the lamp hour meter by using remote control or pressing the multiple combination buttons on machine. When the lamp time clock is reset to zero, the lamp indicator goes out.
Do not reset the lamp timer without replacing the lamp. Do not use it longer when a warning message is displayed as the lamp could explode. Reset the lamp timer always when replacing the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.
Although most items are stocked in our Sydney warehouse, the shown “Quantity available” does NOT reflect Sydney’s current stock levels. The shown “Quantity available” reflects the total quantity available from our multiple warehouse locations, and indicates our ability to transfer the product you require from our various warehouses.
Therefore, we ask that you be patient as the item you are interested in may require time for our internal stock to transit to our main warehouse in Sydney. Please check the “Estimated delivery time” before you place your order as the status may change without notice.
MultiGlare offers express nationwide delivery to any PO Box and Australian street address. Orders are dispatched from our warehouse in Sydney. Track events and tax invoice for your order will be sent to you via email.
Our shipping is a secure and registered delivery. So, your signature is required for your receiving. When a driver is unable to deliver a consignment because no one is available at the delivery location to sign for it, the driver will leave an Attempted Delivery Advice card at the premises, which details how and when the consignment can be collected on the following business day. For all shipping related information, we suggest you to check our email for viewing the tracking information online. You can also call StarTrack for assistance.
Generally speaking, we do not accept returns for refund or exchange, simply if you have changed your mind, ordered by mistake, found it cheaper somewhere else, have bought a gift that is unsuitable, or the circumstances have changed and you no longer require the goods, decided you did not like the purchase or had no use for it. We may however, at our sole discretion, allow a return for refund or exchange product on a case-by-case basis. Once your return request is approved, you will be required to meet the following terms and conditions:
- Item must be received back in brand new, unused, resalable condition, properly sealed in its original packaging. Items bearing any signs of use or damage will not qualify for a refund or exchange, and will be returned to the customer only upon payment of the appropriate postage.
- Buyer is responsible for the return postage.
- 20% re-stock fee will apply.
- The original shipping charge will not be refundable. If the original shipping charges were free, $15 will be deducted for each delivery.
