|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compatibility :
2003-2004 Ford E-150 4.6L
2002-2004 Ford E-150 5.4L
1997-1998 Ford E-150 Econoline 4.6L
1997 Ford E-150 Econoline 5.4L
1997-1998 Ford E-150 Econoline Club Wagon 4.6L
1997 Ford E-150 Econoline Club Wagon 5.4L
2003-2004 Ford E-250 4.6L
2003-2004 Ford E-250 5.4L
1997 Ford E-250 Econoline 5.4L
1997 Ford E-350 Econoline 5.4L
1997 Ford E-350 Econoline 6.8L
1997 Ford E-350 Econoline Club Wagon 5.4L
1997 Ford E-350 Econoline Club Wagon 6.8L
1999-2004 Ford E-350 Super Duty 5.4L CNG Engine
2002-2004 Ford E-350 Super Duty 5.4L VIN M
2002-2004 Ford E-350 Super Duty 6.8L
2002 Ford E-450 Econoline Super Duty 5.4L
2002 Ford E-450 Econoline Super Duty 6.8L
1999 Ford Econoline Super Duty 5.4L
1998 Ford F-150 5.4L CNG Engine
2000-2001 Ford F-150 5.4L VIN M
1997-1999 Ford F-250 5.4L
1996-1999 Ford Taurus 3.0L
1996-1999 Ford Taurus 3.4L
1996-1999 Mercury Sable 3.0L
Features:
- Porous PTFE Filter - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing.
- Double Protection Cover - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- Stainless Steel Housing - Resists corrosion and contamination with a rugged, watertight body.
- Aluminum-Oxide Trap Layer - Keeps silicone and lead outside the ceramic elient through, preventing damage to the platinum electrode.
Where is the oxygen sensor in your vehiche?
Whow to install an oxygen sensor?
1.Locate the oxygen sensor on your vehicle by looking for a part that looks like a spark plug that sticks out from the exhaust pipe. It will have an electrical connection attached to it.
2.Disconnect the electrical connection on the oxygen sensor. Use a flat tip screwdriver to push in the tabs and pull the connection apart.
3.Unscrew the oxygen sensor off the exhaust pipe using either an open-end wrench or a special socket made to remove it. The majority of oxygen sensors will take an SAE 7⁄8 inch (2.2 cm) wrench.
4.Compare your new oxygen sensor to the old one. If the new one did not come with an electrical connection, but just with the wires stubbed out, you need to do a little work.
· Cut off the old connector from the bad oxygen sensor, strip the wires and solder the wires to the new oxygen sensor. You can also use butt connectors.
· Use heat sensitive shrink tape to seal the connections.
· Follow manufacturer's instructions to know which wires to tie together.
5.Reverse the steps used in removing the oxygen sensor and install the new part.Add a small amount of anti-seize to the threads of the new sensor. Screw it in place clockwise and snug it down with the socket or open-end wrench. Do not over tighten the sensor as you might strip the threads.
6.Plug the electrical connections back in.
7.Turn on the ignition key, but do not start your vehicle. Use the diagnostic scanner/reader to clear the code from the vehicle's computer.
8.Start the car. You should notice an immediate improvement.
NOTE:
If you can't determine whether the oxygen sensor fit your vehicle or not, please contact us.
| Item Specifics | |
|---|---|
| Brand | imcarparts |
| Manufacturer Part Number | IM836137CAR |
| Type | Oxygen Sensor |
| Manufacturer Warranty | 1 Year |
| Number of Pieces | 4 |
| Fitment Type | Direct Replacement |
| Pin | 4 |
| Wire | 4 |
| Location | Upstream Downstream |
| Placement on Vehicle | Upstream Downstream |
| Sensor Type | Heated |
| Technology | Narrow-band |
| Attachment Method | Screw-On |
| Universal Or Specific Fit | Specific |
| Housing Material | Metal |
| Terminal Type | Blade |
| Thread Size | M18 |
| Hex size | 7/8 in |
| Connector Quantity | 1 |
| Type | Sensor |
| Features | Direct Fit |
Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
We treat each buyer with a sincere heart, I believe our sincere service , excellent quality of goods will win your trust and support, you may contact us via message and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)
Oxygen O2 02 Sensor For 1996-1999 Mercury Sable 3.0L 4X Upsteam Downstream
Compatibility :
2003-2004 Ford E-150 4.6L
Features:
Where is the oxygen sensor in your vehiche?
Whow to install an oxygen sensor?
1.Locate the oxygen sensor on your vehicle by looking for a part that looks like a spark plug that sticks out from the exhaust pipe. It will have an electrical connection attached to it.
2.Disconnect the electrical connection on the oxygen sensor. Use a flat tip screwdriver to push in the tabs and pull the connection apart.
3.Unscrew the oxygen sensor off the exhaust pipe using either an open-end wrench or a special socket made to remove it. The majority of oxygen sensors will take an SAE 7⁄8 inch (2.2 cm) wrench.
4.Compare your new oxygen sensor to the old one. If the new one did not come with an electrical connection, but just with the wires stubbed out, you need to do a little work. · Cut off the old connector from the bad oxygen sensor, strip the wires and solder the wires to the new oxygen sensor. You can also use butt connectors. · Use heat sensitive shrink tape to seal the connections. · Follow manufacturer's instructions to know which wires to tie together.
5.Reverse the steps used in removing the oxygen sensor and install the new part.Add a small amount of anti-seize to the threads of the new sensor. Screw it in place clockwise and snug it down with the socket or open-end wrench. Do not over tighten the sensor as you might strip the threads.
6.Plug the electrical connections back in.
7.Turn on the ignition key, but do not start your vehicle. Use the diagnostic scanner/reader to clear the code from the vehicle's computer.
8.Start the car. You should notice an immediate improvement.
NOTE:
If you can't determine whether the oxygen sensor fit your vehicle or not, please contact us.
Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay. 1. Orders processed within 24 hours of payment verification.
2. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
We offer a 30 days Free Return
We treat each buyer with a sincere heart, I believe our sincere service , excellent quality of goods will win your trust and support, you may contact us via message and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays) All right reserved. |
Shop Category Hot Item
New List Item
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
