Features:
*Compact easy to use: The EMF meter is a compact user-friendly magnetic field strength meter that can be used both indoors outdoors for measuring electric devices or power lines.
*5 LED's for field strength range: The meter is equipped with 5 LED's that represent different field strength ranges. The normal for zone has a range of 0 to 1.5 milliGauss, the low for zone has a range of 1.5 to 2.5 milliGauss, the caution for zone has a range of 2.5 to 10 milliGauss, the high for zone has a range of 10 to 20 milliGauss, the for zone represents extremely high magnetic fields of 20+ milliGauss.
*Simple : Hold the EMF meter with your thumb on the switch, point it towards the EMF source, depress hold down the switch. The LED will indicate the range of the EMF at that level. for Moving the device may change the reading, so the highest reading is the most accurate.
*Helpful hints: Record the readings on the enclosed Exposure Log for periodic monitoring, as fields can change in strength. If the Green LED (Normal) doesn't light, it indicates a low battery. To change the battery, remove the two screws replace it with a 9V battery.
*Specifications: The detection range of the EMF meter is 0 to 20+ milliGauss, with a detection frequency of 5060 Hz (50 to 1000 Hz-ELF 1000 to 20,000 Hz-VLF). It offers an accuracy of 5% (typical) operates within a temperature range of 0 to 120 Degrees F (-18 to 49C). The meter requires a 9 Volt battery weighs ounces, measuring 5.75" (L) x for 2.25"(W) x 1"(H).
Specifications:
Part Name:LED Magnetic Field Detector
Material:No
Size:5.75 "(L) x for 2.25"(W) x 1"(H)
Color:Black
Package Content:
1 pack LED Magnetic Field Detector
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.