Auciton is for:
ONE - Raspberry Pi Hat Rack V1.1 PCB.
ONE - 180pHAT PCB.
These circuit boards are
DIN Rail Compatible Carrier Boards for Raspberry Pi HATsIn Beautiful PCB Purple. *You are buying the exact boards in the pictures!
Note: These Board do not come with any connectors or surface mount components. You will have to source those yourself depending on how you want to configure the board. The green PCB's are example only of what completed boards will look like.
Before powering on any hat on the hat rack, always check pin-out compatibility. Connecting multiple HATs from different manufacturers can introduce pin conflicts which prevent your boards from working correctly. The responsibility of compatibility lies with the user.
See the full manufacturers details here:
https://plasmadan.com/product/hat-rack-din-mount-raspberry-pi/
https://plasmadan.com/product/180-phat-raspberry-pi-hat-180-degree-adapter/
HAT RACK Description:Stackable HATs have become the de facto standard in the Raspberry Pi community, but stacking HATs together can make them difficult to get to, awkward to maintain and can lead to excessive heat build-up.
The HAT RACK solves this by separating the stack into an easier to manage array. Each board is connected together in parallel which is perfect for I2C based HATs. The plug & play design allows you to create tidy, professional looking setups easily!
Features
- Connect 3 HATs or 6 pHATs
- Plug & play Raspberry Pi or Pi Zero
- Daisy chain multiple boards
- DIN rail mountable
- Optional external 5V DC power input
- Smoothing capacitor provides stable supply
- BCM pin numbering
A single Raspberry Pi can be mounted upside down. No need for ribbon cables, just plug & play! Available as a kit, simply solder whichever headers / sockets you require for your project. Or buy an assembled unit with all the parts pre-installed.
External Powering
You can optionally externally power your boards. This may be necessary when using lots of HATs or pHATs as the Raspberry Pi may not be able to supply enough power to them. This will depend on the HATs being used. Low-power HATs can be daisy chained several times before external powering becomes necessary.
Configuring
The HAT RACK can be configured in loads of different ways. Each board supports 3 HATs or 6 pHATs with a Raspberry Pi or Pi Zero mounted in 1 of 2 positions.
Device Compatibility
The HAT RACK is fully compatible with all 40-way Raspberry Pi models and clones.
| Device Model | Compatibility |
|---|
| Raspberry Pi 1 Model A+/B/B+ | ✔️ |
| Raspberry Pi 2 Model B | ✔️ |
| Raspberry Pi 3 Model B/B+ | ✔️ |
| Raspberry Pi 4 | ✔️ |
| Raspberry Pi 5 | ✔️ |
| Raspberry Pi Zero | ✔️ |
| Raspberry Pi Zero 2 | ✔️ |
| ATMegaZero | ✔️ |
| Asus Tinker Board | ✔️ |
| Banana Pi | ✔️ |
| Odroid | ✔️ |
| Orange Pi | ✔️ |
| ROCK Pi | ✔️ |
180pHAT Description:
The 180 pHAT is a Raspberry Pi HAT adapter which reorients the GPIO header 180 degrees. It can be mounted directly onto a Raspberry Pi or any other pin-compatible SBC (single board computer) and can even be used in-conjunction with our HAT RACK boards.
Features
- 180 degree oriented GPIO header
- Works with all pin-compatible SBCs
- BCM pin numbering
- Compatible with our HAT RACK boards
Device Compatibility
The 180 pHAT is fully compatible with all 40-way Raspberry Pi models and clones.
| Device Model | Compatibility |
|---|
| Raspberry Pi 1 Model A+/B/B+ | ✔️ |
| Raspberry Pi 2 Model B | ✔️ |
| Raspberry Pi 3 Model B/B+ | ✔️ |
| Raspberry Pi 4 | ✔️ |
| Raspberry Pi 5 | ✔️ |
| Raspberry Pi Zero | ✔️ |
| Raspberry Pi Zero 2 | ✔️ |
| ATMegaZero | ✔️ |
| Asus Tinker Board | ✔️ |
| Banana Pi | ✔️ |
| Odroid | ✔️ |
| Orange Pi | ✔️ |
| ROCK Pi | ✔️ |
