Extra-versatile files for fret end shaping.

These unique tools are for use after the frets have been installed, trimmed flush to the sides, and beveled with a flat file. The single-cut toothed concave filing surface of these files makes smoothing the fret ends and delicately blending them into the crown of the fret more efficient. A professional touch, and a great fix for fret ends that protrude in dry weather, too.

Efficient design: Each file has a slim shape and 30-degree angled end, for good control and ease of use. The right tool for the job.

Concave surface: Single-cut teeth help blend the fret ends into the fret crown.

Safe surface: Opposite the concave edge is a flat, untoothed surface to protect the fretboard when you're filing with the side surfaces.

Toothed sides: The single-cut teeth on the sides file away metal burrs and help smooth the bevel on the fret ends.

Safe corners: Each file also has smooth untoothed corners to help prevent damage to the fingerboard and the upper edges of bound necks.


Each of these sturdy steel files is 7-7/8" long (similar files from other suppliers are only 3"), a practical length for filing fret ends without jamming the handle against the edge of the fretboard.

More file specifications:

Cutting surface length is 2-3/4".

Cutting width is .120" (3mm) for wide frets.

The file handle is rubber-coated for comfort.


Works on stainless frets, too! All of our tools are suitable for use on stainless-steel fretwire, with the exception of our Fret Tang Nippers. Modern stainless-steel fretwire is known to be harder than the traditional nickel-silver blends, but our own shop experience indicates the wire does not cause premature wear of files or sandpapers.