|
TES-3050 TRMS AC/DC Clamp Meter
|
|
I.Introduction:
| EN61010-1. |
| 600V INSTALLATION VAT III. |
| POLLUTION DEGREE 2. |
| 3-3/4 Digital LCD with bar-graph. |
| Auto-ranging off / Data Hold / Peak Hold / MAX/MIN mode. |
| Zero Adjustment/Relative Reading. |
|
Range | DC-400mV/4V/40V/400V/600V
AC-4V/40V/400V/750V | Accuracy | DC - 0.75% rdg + 2dgts
AC - 1.2% rdg + 5dgts | Resolution | 0.1mV (DC); 0.001V (AC) | Input Impendence | 11M Ω | Overload Protection | DC 1100V & AC 800V |
|
Range | 400/1000A | Accuracy | 2% rdg + 10dgts | Resolution | 0.1A | Overload Protection | 1100A |
|
Sound Level | below 40 W | Max Open Circuit Voltage | 0.5V | Diode Resolution | 0.001V | Accuracy | 1% rdg + 2dgts |
|
Range | 400 Ω /4KΩ /40KΩ /400KΩ /4M Ω /40M Ω | Accuracy | 1% rdg +3dgts | Resolution | 0.1Ω | Accuracy | 1% rdg + 2dgts | Overload Protection | 600Vrms
(Also for continuity & Diode) | Max open Circurit Voltage | 0.5V |
|
Range | 100Hz/1KHz/10KHz/100KHz/800KHz | Accuracy | 0.1% rdg + 2dgts | Resolution | 0.01Hz | Max Input Sensitivity | 100mV | Overload Protection | 600Vrms |
|
Range | 400/1000A | Accuracy | 2.5% rdg + 10dgts | Resolution | 0.1A | Overload Protection | 1100A |
|
Range | 4V/40V/400V/750V | Accuracy | 2.5% rdg + 10 dgts | Resolution | 0.001V | Input Impedance | 11M Ω | Overload Protection | DC 1100V & AC 800V | Numerical Display | 3 3/4 digit liquid crystal display (LCD) maximum reading 3999 | Sampling Rate | 20 times/sec (Bargraph )
2 times/sec (Digital Display) | Power Source | one 006p 9V or IEC 6F22 or NEDA
1604 Battery | Dimensions | 239(L) x 66(W) x 34(H) mm | Weight | Approx. 365g |
|
