INSTALLATION:
- Diagnostic trouble codes to identify the faulty sensor Test zero status with the multimeter and select several points to measure the signal output, Normal output is no problem.
- Disconnect the oxygen sensor, Remove the oxygen sensor Remove the cover, slowly unscrew the oxygen sensor plug before opening the triangle iron can see their own oxygen sensor.
- Compare the oxygen sensor The problem can be seen by comparing the removed sensor with the newly purchased oxygen sensor.
- Install the new sensor and connect the harness Install the new oxygen sensor according to the position of the original oxygen sensor, Screw the plug to the joint.
- Clear the codes then start the vehicle After the installation is completed, start the vehicle and check whether it is running normally
Common Oxygen Sensor Locations
Front and rear oxygen sensors are different do please confirm up and down in the description.
Precautions
|
|
|
|
|---|---|---|
|
Problem With Ternary Catalysts Key points: if there is a problem with the ternary catalyst, replacing the oxygen sensor willnot solve the problem of the fault light. If the ternary catalyst has no effect, the data detected by the oxygen sensor will be anormal. |
Distingush Oxygen Sensor Polsoning The oil pollution - The fuel additive enters the engine to burn Silicone poisoning - Silicon compounds exist in some sealing materials as corrosion inhibitors Antifreeze agent contamination - The antifreeze leaked from the cylinder head to the engine and burned |
Actual Installation Display This is the picture of the physical scene installed by the oxygen sensor. For a more intuitive understanding of the use of oxygen sensors. |
1 Year warranty against manufacture defect.
If the product you receive is not the one you ordered, please take photos of any visible part numbers of visual reference and contact us directly; photos must be CLEAR and have the part numbers VISIBLE. Logistical claims must be filed within 30 days of received the product; exchanges in these cases will be handled promptly and at?no cost to the customer.
In order to process a return or exchange, please call us or send us a message through eBay and we will be happy to assist you immediately.
However，any return that is NOT defective or NOT received in error, is the responsibility of the customer. We DO NOT cover any shipping costs and/or additional fees associated with the transaction.
