Compatible with Land Rover LR2, Discovery Sport & Range Rover Evoque | 10-Piece Friction Disc Set
AWD Haldex Coupling Unit Friction Clutch Repair Kit
Compatible with Land Rover LR2, Discovery Sport & Range Rover Evoque | 10-Piece Friction Disc Set
Please provide your VIN (Vehicle Identification Number) to verify fitment before purchase.
THIS LISTING IS FOR THE 10-PIECE INTERNAL FRICTION PLATES ONLY.
STEEL SEPARATOR PLATES, HALDEX PUMP, FILTER, FLUID, AND SEALS ARE NOT INCLUDED.
This 10-piece friction kit shares the universal physical dimensions for BorgWarner Haldex systems spanning Generation 3, Generation 4, and Generation 5 used across the Land Rover and Range Rover platforms.
Front-wheel spin, lack of rear-wheel drive engagement, and dashboard AWD faults are classic symptoms of burnt friction discs inside the Haldex unit. However, friction plates rarely fail on their own. Please address the root cause:
- Failed Haldex Pump / Clogged Screen: The Haldex pump generates the hydraulic pressure to squeeze these plates together. If the pump filter/screen is clogged with old sludge, pressure drops, causing the clutch plates to slip and burn instantly.
- Neglected Fluid Services: The Haldex system requires specific fluid. Using standard differential gear oil will destroy this friction material.
📦 Package Includes
- 10 x Haldex AWD Coupling Friction Clutch Plates
- Important: You will reuse your existing steel separator plates.
Condition: Brand New Aftermarket Replacement
Brand: AcuNova
🚗 Vehicle Compatibility Guide
Strictly fits models equipped with Haldex Gen 3, Gen 4, or Gen 5 AWD Coupling Units.
| Model | Chassis | Years | Haldex Generation | Fitment |
|---|---|---|---|---|
| Freelander 2 / LR2 | L359 (Early) | 2006 - 2008 | Haldex Gen 3 | Direct Fit |
| Freelander 2 / LR2 | L359 (Late) | 2009 - 2014 | Haldex Gen 4 | Direct Fit |
| Range Rover Evoque | L538 | 2012 - 2018 | Haldex Gen 4 / Gen 5 | Direct Fit |
| Discovery Sport | L550 | 2015+ | Haldex Gen 5 | Direct Fit |
🔢 Reference OE Numbers (Complete Haldex Assemblies)
This 10-piece friction kit fits inside AWD coupling units and rear differentials carrying the following Land Rover OE reference numbers:
🔧 B2B & Pro Installation Notes (Pro Tips)
- Professional Installation Only: Must be installed by a certified driveline technician. Improper clearance setup or debris left inside the clutch drum will destroy the new friction material.
- Compulsory Replacement Parts: You MUST thoroughly clean or replace the Haldex Pump screen/filter. A complete fluid flush using ONLY dedicated OEM-spec Haldex Fluid is mandatory. Standard 75W-90 gear oil will dissolve the friction lining.
- System Calibration: After replacing the clutches and pump fluid, the AWD module may need to be recalibrated or have its adaptation values reset using JLR SDD or Pathfinder diagnostic software.
